PDA

View Full Version : 2 pieces Cold Air Intake Recommendation civic 92-95 SOHC



tigerwing
16-02-2011, 11:39 PM
sup bros :wave:,

which do you recommend for me:confused:, i want a good brand but not too expensive and must be 2 pieces...:thumbsup:

thanks!

davidvtec
16-02-2011, 11:51 PM
What do you mean by 'must be 2 pieces' ?

tigerwing
17-02-2011, 12:10 AM
like this one, but of course a good brand!!
http://images.channeladvisor.com/Sell/SSProfiles/60000488/Images/2/85-0021PCP.jpg

some CAI come in one piece like this, this don't works for me cuz here in panama rains to much and too many floods over here...
http://www.ninjamotorsports.com/images/fujita/CA-1902.jpg

any advice?

davidvtec
17-02-2011, 01:30 AM
A Trader here, Shift Performance may have what your car needs..

Carbon Mugen Style Air box - This intake doesnt go as low as the CAI does, but does feed cold air.. and sits a little higher, so now problems to rains or light floods.

http://i988.photobucket.com/albums/af2/David_Vtec/carbon_mugen.jpg

And sits like this:
http://i988.photobucket.com/albums/af2/David_Vtec/P1010559.jpg

This uses the original intake arm, or short ram intake can be used. This intake box grabs cold air as well.

tigerwing
17-02-2011, 01:54 AM
seems good option...

do you have any other option?

thanks for all

davidvtec
17-02-2011, 11:32 AM
Theres other options.. similar design to this, but a cheaper version. Not the best, and doesnt work as well as this carbon one.

Link: http://www.ozhonda.com/forum/showthread.php?127778-Mugen-Style-Air-Box-Civic-EG-EK-BACK-IN-STOCK

I had this to start with, its cheap, and did the job. But sooner or later you wana upgrade :)

dougie_504
17-02-2011, 11:54 AM
If I were you I'd get that cheap Ebay one with the black rubber pieces and just change the pod filter. Pipe is pipe.

tigerwing
17-02-2011, 11:19 PM
If I were you I'd get that cheap Ebay one with the black rubber pieces and just change the pod filter. Pipe is pipe.

what about this one?

http://cgi.ebay.com/ebaymotors/HONDA-1-5-1-5L-1-6-1-6L-COLD-AIR-INTAKE-92-95-K-N-FT-_W0QQcmdZViewItemQQhashZitem41542a109bQQitemZ28058 4917147QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

davidvtec
18-02-2011, 10:21 PM
what about this one?

http://cgi.ebay.com/ebaymotors/HONDA-1-5-1-5L-1-6-1-6L-COLD-AIR-INTAKE-92-95-K-N-FT-_W0QQcmdZViewItemQQhashZitem41542a109bQQitemZ28058 4917147QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

That one sits the same positioning as the one piece CAI.

tigerwing
19-02-2011, 12:09 AM
That one sits the same positioning as the one piece CAI.


yes, but i can use it as CAI or as SRI.... :D

the pipe is 2.75"... is good?

davidvtec
19-02-2011, 12:22 AM
What car do you drive? eg? and what motor?

tigerwing
19-02-2011, 12:39 AM
here is my thread

http://www.ozhonda.com/forum/showthread.php?145488-My-Civic-Ej1-Project-from-Panama

ej1 with d16y7, d16z6 IM and d15b7 tranny...

dougie_504
19-02-2011, 02:28 PM
Get a 3" intake