noob question - dc2r rear lcas fit eks?

[jdmEG5]

Sorry noob question,

I was wondering if the dc2r lcas fit ek's ?

Sorry if it had been asked before..

Thanks

[na-118]

nah they stick out a bit,,
function 7 make dc2r for ek

[jdmEG5]

What do you mean the stick out abit man?

I'm just planning to put my dc2r coilovers onto my ek, but rear is different, so I thought swapping the lcas over will work? Lol

[MWAKU]

theres a diy somewhere u have to shave it a bit i think

[jdmEG5]

Shave which part bro? Lca or coilovers? Lol

[1590cc]

Yes you can use them.. don't whats needed to be done in order to be fitted. But it's been done. Since the LCA is shorter compared to stock EK ones. It'll ruin your camber settings.

[jdmEG5]

So it'll give heaps of positive camber. Can the ek one fit EG's?
Thanks for your reply though ^

Has anyone here done this before?

[niiCk]

EKs wont fit onto EGs as it is like 3inches longer.
in order for EK suspension to be put into EGs, the bushings have to be shaved down.

DC2R lcas, are too short to be fitted onto EKs and therefore you will have positive camber, and alot of it.
you'll have to use some aftermarket LCAs.

[string]

Knew I saved this for a reason. EK LCA is 66mm longer bolt to bolt (assuming the information is correct, which it might not be, but what is likely is that it correctly identifies your problem, that the EK is the ugly duckling so to speak).