Pic Request - Under axle (style) mufflers!

[civicboy]

hey guys, plz post ur pic of ur ride with under axle catback :thumbsup: :D
or pix of the cars from the states...so giv it away!

i want to have an idea on how it looks on civic h/b ;)


thanx yall :wave:

[bennjamin]

dam sexy.

I would post up a piccy of my old EG underaxle but im at work.
*waits to run home*

[civicboy]

hehehe hurry ben! cant w8 2 c some of ur car pix! :D
ok ill start off :p
http://img188.exs.cx/img188/1550/orangecivic4ou.jpg

[Kawasaki]

get abit of mega scrapeage from them? Looks nice!

[civicboy]

hehehe i know huh...wats a good set up for aust. roads?
ive seen the one thats over the axle then it sort of go down & angled out; N1 style (like the 1st pic that ive post)

[civicboy]

bump any1?
i know a few o.h. members with that style :)

thanks

[panda[cRx]]

doesnt look too practical

[bennjamin]

http://img.photobucket.com/albums/v104/bennjamin/DSC02109copy.jpg

heres an old piccy of my old car...for reference - the distance of the lowest point to the ground , was about 5cm. But gosh was it sexy :)

[--eskimo-eg--]

heres an old piccy of my old car...for reference - the distance of the lowest point to the ground , was about 5cm. But gosh was it sexy :)
did it give u a hard time when driving? it sure does look nice:D

[BlueSiR]

it looks like mine, just a little more lower. but i change mine bak to standard alrdy, i was told by da muffler guy its too close to da fuel tank, da pipe can heat up to burn through da tank! very dangerous! so.. no sttaight piping for civic? doh :(

[egSi]

i have an underaxel setup on my eg atm, i look for a pic

[luzinit]

ive got a catback on my car, it follows stock routing most of the way then goes underaxle n yeh.. will post pics if u want, but its an EK

[egSi]

here mine, fukn ghetto, i have a new muffler to go on this arvo, ill get some more pics when its on :thumbsup:


its raining here and my shit looks dirty as :(

[VTEChnique]

ohh that pink EG6 is one of my favourites on the net !!

Mine is 2.5" piping - follows stock path but then when it is to go over the axle, instead it ducks under the axle (near where your stabilizer bar mounts) then back over to the 'hole' in the bumper... is different to those pictured on here, am looking for one of my photos now..

as for scrapage.. well my car being like 2-3" off the ground anyway doesnt help, but if u follow the original exhaust path and then just duck under the axle at the end you should be fine.

The photo below doesnt really show it, i have the under-car shot at home PM me and i'll email it to you.


http://img141.exs.cx/img141/9697/sirrear2iz.jpg

As you can see, where the piping ducks under the axle - it's no lower than any other parts of the under-body :)

[egSi]

http://server6.uploadit.org/files/VTEChnique-bede_back.jpg
cars lookin real cool bede :thumbsup:

eg power y0! ;)

[VTEChnique]

hehe thanks trav ;) is goin better now too with JDM B16 :D

[egSi]

hehe thanks trav ;) is goin better now too with JDM B16 :D
bah! now way :rolleyes: is that a stock eg5 hatch wing u have colour coded? its not eg6 one is it, coz theres not LEDs...

sorry for the hijack also :p

[VTEChnique]

EG6 Rear wing on the way LED's and all - have organised one but am shipping it from New Zealand :)

soon grasshopper.. soon !!

[fusion_VTi]

wish mine was underaxel :( mine looks squashed like a ****ing banana

[egSi]

EG6 Rear wing on the way LED's and all - have organised one but am shipping it from New Zealand :)

soon grasshopper.. soon !!
me too man, me too. ill have one on my eg soon :thumbsup:

[civicboy]

i have a new muffler to go on this arvo, ill get some more pics when its on :thumbsup: coolz! ya post it up & let me c dat thoonng! lol! :D

[civicboy]

The photo below doesnt really show it, i have the under-car shot at home PM me and i'll email it to you.yeah its too dark...u can just post it up here?

[civicboy]

w8n 4 ur pic vteknik.......hhmm

[egSi]

coolz! ya post it up & let me c dat thoonng! lol! :D
keep ya pants on mang!!

http://www.d-series.org/forums/attachment.php?attachmentid=3489&stc=1


http://www.d-series.org/forums/attachment.php?attachmentid=3491&stc=1


http://www.d-series.org/forums/attachment.php?attachmentid=3492&stc=1

[ORACER]

[QUOTE=bennjamin]http://img.photobucket.com/albums/v104/bennjamin/DSC02109copy.jpg


NICE:thumbsup:

Carbing tiebar:thumbsup:

[civicboy]

whoooa looks mean manng! :D
2 or 2.5"? i like it

[egSi]

whoooa looks mean manng! :D
2 or 2.5"? i like it
u talkin to me?

i got 2.25 pipin with my sexy new muffler :D

[VTEChnique]

w8n 4 ur pic vteknik.......hhmm

here ya all go.. you should be able to see how it follows the stock Exhaust path before ducking under the rear stabiliser bar..

http://img167.exs.cx/img167/7710/exhaustpiping1fk.jpg

[egSi]

here is yonas's(eg5) setup, zc king with very fast NA Si :D

pimpin apexi gt spec :thumbsup:

[VTEChnique]

ohh man I love that muffler - HKS makes one similar as wel las 5Zigen.. would be fkn loud tho I imagine ?

I saw a complete EG HKS cat-back for $350 with that muffler 6 months before I bought my EG :(

am just sorting out hosting for my image - will be up soon...

[civicboy]

u talkin to me?

i got 2.25 pipin with my sexy new muffler :Dya i was..oic...cool :cool:

[civicboy]

vtec, send it 2 me!!!!!
cvc80y@hotmail.com

[egSi]

id recommend a under axel man, mine scrapes a lil bit but it didnt when i took all my interior out :thumbsup:

[civicboy]

nicee vtek, is it full stainles steel pipes?

[civicboy]

ive got a catback on my car, it follows stock routing most of the way then goes underaxle n yeh.. will post pics if u want, but its an EKPost it up luzinit! :thumbsup:

ben, did u get alot of scrapin wit ur underaxle...got any rear view of ur ride plz? :honda: :thumbsup:

thanks :wave:

[VTEChnique]

civicboi.. nah it's just mild steel (mandrel bent)..

[civicboy]

civicboi.. nah it's just mild steel (mandrel bent)..ya, dats cool :!: mild steel r top huh?

[VTEChnique]

ya, dats cool :!: mild steel r top huh?

what you mean bro ? i dont get what you are asking ??

[Sp3rMz]

I don't think that was a question. Think it was more of a statement from what i can figure. :confused:

[bennjamin]

ben, did u get alot of scrapin wit ur underaxle...got any rear view of ur ride plz? :honda: :thumbsup:

thanks :wave:


hullo :)

my underaxle - scrapped on EVERYTHING that WASNT flat horizontal road :)
at its lowest point , it was about 5cm directly at the axle line so was OK for normal driving.

JUST with an underaxle - due to the lack of backpressure be sure to get at most 2 inch piping fro the cat back :)

[civicboy]

i wanna c more! :D :D :D

ben...got any rear end shot of ur old under axle cat back? tnx

[EG5]

my old set up with apexi n1 muffler + custom underaxle
http://img.photobucket.com/albums/v677/YonasLiu/DCP_0025.jpg

[BADHBT]

heres mine as requested!
hope this helps :thumbsup:
straight through minimal bend as possible just one right under the tie bar!!!!
2.5 pipping
never scrapped, gone over speed humps with ease
only scrapped my muffler at my house stupid dip!!!!! lol
other that that nothing to worry about :thumbsup: :D


http://img.photobucket.com/albums/v722/badhbt/100_0302.jpg


http://img.photobucket.com/albums/v722/badhbt/100_0549.jpg


last pic is a freebie lol

[civicboy]

ooooh nice BADHBT :!: thanks alot for the pik :thumbsup:

ROFL! :D :D :D

[r|Ce_bOi]

heres mine as requested!
hope this helps :thumbsup:
straight through minimal bend as possible just one right under the tie bar!!!!
2.5 pipping
never scrapped, gone over speed humps with ease
only scrapped my muffler at my house stupid dip!!!!! lol
other that that nothing to worry about :thumbsup: :D


http://img.photobucket.com/albums/v722/badhbt/100_0302.jpg


http://img.photobucket.com/albums/v722/badhbt/100_0549.jpg


last pic is a freebie lol

hey marc,

can you tell us what brand muffler you are using ?

[civicboy]

rice boi...i think its an apex'i n1 muffler style?

[Disciple]

Heres a pic of mine guys :) old pic, cant see too much :(..

Soon to be updated :D b16a comin' YEAAAAAAAAAAH! hehe
http://tinypic.com/1yl282

[BADHBT]

its and apexi N1

[jdmcrex]

hehehe hurry ben! cant w8 2 c some of ur car pix! :D
ok ill start off :p
http://img188.exs.cx/img188/1550/orangecivic4ou.jpg
what color is that?
can u pm me with the color
thanks