d16y4 to eg problems guides?

[kr4zie]

Hey guys,
I've got a eg already converted to efi but had a blown engine, and another eg d15b4 also blown engine.
I've come to find a cheap d16y4 from the ek and would like to know if it would be a straight bolt on or any mods would be required.
Any help would be appreciated would be looking to so it really soon
Thanks in advance.

[oocus]

gday,
i have just finished this swap.
it is a pain in the axx.
to run it in an eg you have to change the y4 to eg inlet manifold, top and rear engine mounts, dizzy, altenator, power steer pump,
mechanically it is just a bolt in swap as far as the engine goes, but the sensors wiring and idle control are different
mine is all together now, i put a y1 head on the y4 as well as vti exhaust and manifold.
i ma still running the ecu from the original d15z1 that was in it.
it bogs down on low revs but once its over 3k it goes good, might have to change ecu next
good luck

[kr4zie]

Anyone else done this?