View Full Version : Rebuilding my b18c7 need some surggestion!!
Chrispee
21-03-2011, 02:28 PM
Hey Guys...
Just need some advice, ive had a stock b18c7 (Eg Civic) for 8 months now and im abit sick of it
im willing to spend 5k ish on the engine its self but no sure what to spend it on (engine wise) to gain alot more power and will 5k be enough?
and its a regested car so nothing to hectik ;)
And i want to keep up with V8 and turbo cars and also want to keep it NA
quangsuke
21-03-2011, 02:45 PM
your best bet is to talk to the guys from toda.
they can manage and sort you out.
they give u warranty on their builds too (from what im told)
fatboyz39
21-03-2011, 04:31 PM
What kind of intake system/ headers and exhaust do you have? Ill firstly upgrade those before thinking about engine rebuild for more power. Once all that is upgraded get a tunable ECU i.e hondata, neptune and etc and tune it.
After that look into running a close gear ratio gear set, relatively cheap to buy and performance wise will outweigh other mods further on.
tiah313
21-03-2011, 04:51 PM
rebuild with more aggressive cams and get a proper tune with I/H/E.
Chrispee
21-03-2011, 05:20 PM
well everything is stock atm moment pretty much just skunk2 full exhuast, headers and k&n cold air intake i wanna work the cams stuff like that i dont just want to change the ECU to get closer ratios more engine work
If you change the cams you'll need a new ecu and tune and changing your final drive or ratios will give you your best bang for buck improvements as is suggested. Have you researched at all, and how far do you think 5 k is going to get you also?
Chrispee
23-03-2011, 09:19 PM
If you change the cams you'll need a new ecu and tune and changing your final drive or ratios will give you your best bang for buck improvements as is suggested. Have you researched at all, and how far do you think 5 k is going to get you also?
like i said im pretty new at this i just wanted to know what part of the engine can i work & how much would i have to spend for a decent worked engine?
fatboyz39
23-03-2011, 09:23 PM
K Swap.
I agree. Stop wasting time with B series.
damienm
23-03-2011, 09:27 PM
I agree. Stop wasting time with B series.
i agree with fatboyz.
i had a b18cr n lucky i didnt waste 5k modifying it.
Instead i bought a k24 which rips the shit outta the 1.8litre
[daan]
23-03-2011, 09:32 PM
on a 5k budget? i dont think so...
grifty
23-03-2011, 09:57 PM
10k budget if you sell the b18c7
Super-DA9
23-03-2011, 10:00 PM
B20Vtec using the B18C7 head with Full Toda head package and high comp pistons, port and polish, ITB's, Injector Dynamics 725cc injectors, Walbro fuel pump and Hondata S300.
You'll rape turbo cars but I think that'll be a buttload more then $5K lol
otherwise if you just want more fun, do the head internals (cams, gears, valve springs, valves) and get the head shaved while you're at it, then hondata + tune. :)
MikeyG
23-03-2011, 10:29 PM
forgot the b series... its the d series time to shine
davidvtec
23-03-2011, 11:31 PM
k24 motor
NightKids
24-03-2011, 09:05 AM
Sell everything and turbo a D, you'll be saving money
damienm
24-03-2011, 02:48 PM
;2977812']on a 5k budget? i dont think so...
didnt you read that he was going to spend an extra 5k on top of the b18c7?
if he sells the motor package hed have enough for a kswap...
try read a little more before giving stupid answers like that
CRXDEL501
24-03-2011, 04:04 PM
didnt you read that he was going to spend an extra 5k on top of the b18c7?
if he sells the motor package hed have enough for a kswap...
try read a little more before giving stupid answers like that
LOL no one reads these days, you gotta be kidding right?
damienm
24-03-2011, 04:14 PM
yeh why wouldnt he have enough if he sold the b18cr and had 5k on the side?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.