HELP!! With rim+tyre fitment for eg

[duzy]

Hey guys,
My cars currently running 195/50/15 on 15x7 +38 rims. Its lowered about roughly 2.5" on skunk2 springs. Guards are standard not rolled. (car is a civic eg hatch)

Im currently wanting to fit 15x7 +15 offset on 195/55/15 slicks for track use.
Question is will they fit without having to flare or roll guards?

Any help appreciated. Thanks

[dougie_504]

I think you'll have some trouble mate. Would need plenty of camber. For 7" I think you need at least +35 to get close so you might want to roll the guards (especially the rears).

Is it possible to fit the slicks onto your +38 rims? Tyre swapover isn't too expensive.

[tsol0811]

They will scrub alot... best if you roll your guards
like what dougie said +35 on 15 x 7 are just on the verge to scrub...

also if u go 195/ 55/ 15 it will scrub even more.... you will need ur guard rolled either way

[MWAKU]

my mate can pump the guards for ya u agfays

[duzy]

ahh fail, thanks for the help.

roll + flare?

[dougie_504]

I think you'll be looking at roll + camber at least. For the front have you considered aftermarket flared guards? If you're going track it might be a good investment, but personally I would just suggest getting wheels with a better offset.