[CL9] k-pro?

[lenniikient]

hey guys, i was just wondering..
why cant the cl9 use the k-pro?
is there any other alternatives?
im thinking of putting skunk2 stage 3 cams, 45/50degree VTC and skunk2 cam springs in =\

[shmivic]

CL9 can use K-pro.

[marquee]

CL9 Can use KPRO however has to be dual harness setup as our cars have so many electronics running from the ECU it needs to still be there. Hondata stopped making a dual harness kit however another manufacture has released the kit and can be done now.

However you will loose VSA when doing this as KPRO managing the engine and does not have VSA.

So basically 2 ECU's KPRO for engine management and stock one for everything else but i think you may need the Acura TSX ecu I may be wrong here though.

EDIT

You can get a reflash which is alot cheaper then getting KPRO and for a midly tuned car is all you need KPRO should be used for higher end mods such as internals and forced induction

[wuism]

here is the other manufacturer.

http://k-tuned.3dcartstores.com/Dual-ECU-KPro-Harness-Accord-CL9-03-07_p_18.html

[lenniikient]

thanks for the info :D

[snYpz]

With the k-tuned harness, you will not need a tsx ecu.
If you are doing simple bolt-on mods, then there are other options for tuning that may be cheaper. Eg. Haltech interceptor, E-manage.