PDA

View Full Version : [CL9] 2003 Accord Euro OEM head unit removal



Fredoops
09-04-2011, 12:44 PM
I found it REALLY hard to find a guide to remove the head unit for repairs (or coin removal, don't ask...) online....

Since the AUDM Euro has different dash compared to the USDM Acura TSX. Then it hit me... AUDM euro uses same dash and unit as the seppo Accord VTi etc.

So I did another search using the big 'seppo' accord and found this guide, it's 90% what the Euro is.

http://www.cardomain.com/ride/561772/2003-honda-accord/page-3

hope that helps

aaronng
09-04-2011, 02:33 PM
That guide is not doing it the best way. Following that, the trim around the aircon vents will have damage from the screwdriver. You are supposed to put the screw driver into the vents and at the side, there is a little groove for the screw driver to sit in. Then you can pull that part out without damaging the surrounding plastic.