genuine EF9 and B18CR

[jayeston]

Hey guys,
i was wondering what is involved in installing a B18cR. Would it be a straight fit or would i need to extra parts (harness, etc). Also the would my current cable gearbox fit the b18cR motor?

[trism]

1. use the search function. and google.
2. yes it will fit straight in. Most of the loom should be sweet, there might be a couple of sensors that need modding, diff wiring, but thats about it
3. yes the box will bolt up

[TODA AU]

Hey guys,
i was wondering what is involved in installing a B18cR. Would it be a straight fit or would i need to extra parts (harness, etc). Also the would my current cable gearbox fit the b18cR motor?
If you have a genuine JDM SiR with B16A as factory, then it's not a big deal.
But the EF9 SiR is OBD0 & B18CR is OBD2a so you will need a new harness or quite a bit of work modding what you have. (I recommend Rywire Mil-Spec for zero greif fitment)
If you do go a new loom, I also recommend you just use OBD1 ECU connectors & a Hondata S300 in a P28 with tune for best results. (Stuff staying OBD2a - only your dissy, injectors & alternator will be that; unless of course you want to stay with the stock ECU or use a Power FC)
& don't go too spastic on the clutch... I.E: Don't go past an Exedy sports organic (HCK-6886SO) as you'll have cable issues.
(You may need to smack the bonnet support bracing a little too for clearance)

If you've got an Aussie model well then it's a whole differnt ball game.

[dougie_504]

I thought the EF9 would have been OBD0?

Anyway why would you go B18CR when you already have a B16A? Do a B20 IMO.

[TODA AU]

I thought the EF9 would have been OBD0?.
Sorry... typo... You're right, It's OBD0.
But with an electronic speedo.

[Snoop_gee]

no doubt its do-able.

http://img101.imageshack.us/img101/6746/serdar1r.jpg

http://img84.imageshack.us/img84/8448/serdar10.jpg

http://img413.imageshack.us/img413/3064/serdar11n.jpg

Contact Ozhonda's member "OLD SCHOOL" (http://www.ozhonda.com/forum/member.php?19852-oldschool) for more info if need be.

[jayeston]

Thanks guys for all your help much appreciated. Im still in the process in looking for a motor.