RPM Fluctcuating once engine mounts fitted DC5R

[lemmiwinks]

Just finished installing my Hasport mounts for my DC5R. Although when the car is idling the revs will occasionally fluctuate between 600-800rpm and feels like the car is going to stall. Is this normal?

[r3ckless]

shouldnt be at alll. simply try resetting ecu, see if that helps?

[lemmiwinks]

I disconnected the battery while I was fitting the engine mounts. Could the ecu still be in "learning" mode? Drove the car about 5km's since the install.

[bennjamin]

possible yes. But IMO the feeling you have is more likely a resonance in the engine amplified by the stiffer mounts.....FYI my EP3 has stiff mounts and once it settles to warm idle it has a almost THROB THROB THROB feel to it.

[TypeS]

The ECU is in learn mode.

As per the manual you are supposed to let it idle for 10 mins or until the cooling fan comes on a second time, and during that period there is a lot of fluctuating RPM's as the ECU attempts to recognize the air/fuel ratios.

If you didn't do this the first time around, I'd reset it again.

[lemmiwinks]

I'll probably reset it again tomorrow.

Although I did let the car warm up from cold until the needle was in the middle of the gauge

[Nuci]

Out of curiosity which mounts did u get mate? 62a or 70a? Coz I'm planning on buying some myself very soon, mine are ****ed. And where from if you don't mind me asking?

[lemmiwinks]

62a which are more than enough for street and light track. JDMyard