Boot Liner Clips

[I CU2]

Does anyone know where I can get Boot Liner Clips for the Euro?

I broke two while looking at how to change the number plate lights.:(

[white_ep3_civic]

Try Autobarn or supercheap. They sell clips there.

[kural7]

hey where you able to change the lights on the number plate? if so can you give me some tips i broke one of the lights scared to try the other atleast i have half a legal light on my number plate :P

[I CU2]

hey where you able to change the lights on the number plate? if so can you give me some tips i broke one of the lights scared to try the other atleast i have half a legal light on my number plate :P

It's easy, take off the boot lining clip. You'll see the number plate light socket things which just click out and you change the lights.

It's in the manual :).

[kural7]

i tried from the external face. hope i didn't do any serious damage :P

[furythree]

there is is an eaier way if u pull out the light along with the cable from inside behind the boot lid. i did mine last year, but i found that out after doing it the boot liner way

acurazine has a thread with instructions and pictures

[I CU2]

there is is an eaier way if u pull out the light along with the cable from inside behind the boot lid. i did mine last year, but i found that out after doing it the boot liner way

acurazine has a thread with instructions and pictures

That's the same way as my method and the same method found on the Euro manual. I might have described it badly.

[SPQR]

there is is an eaier way if u pull out the light along with the cable from inside behind the boot lid. i did mine last year, but i found that out after doing it the boot liner way

acurazine has a thread with instructions and pictures

Yeah but they call them 'license plates' over there so don't search 'number plate'.

[I CU2]

I broke another one today!! Gahhh.

Can someone tell me how you properly remove and resert them?

[white_ep3_civic]

Depends on which ones they are. They are very easy to break even removing them the right way.

If they are the ones with the push in centre then all you need to do is push the centre in and then carefully pull it out. Might need a flat blade screw driver to help.
If they are the ones with the phillips head, then unscrew them with no force so they don't push back in and they pull them out, again you might need a flat blade screw driiver.

There a few other different ones too but that's all I can think of ATM