Is the Prelude offset the same as DC2R?

[stoff]

i want to buy some rims from my friend, and they're currently on his DC2R.

if they fit on the DC2R..and the offset is good for the dc2r, is it gonna fit on a 5th gen lude?

and will the offset be fine etc..

[|N|]

i know dc5r 's wheel will fit on lude no probs at all.. so i assume dc2r is the same

[91'lude]

Do you mean AUDM or JDM dc2r... cos the offset is different.

[stoff]

Audm.

[91'lude]

Mcchook has DC5 wheels *i think* on his 5th gen prelude... im sure he'll find his way in here soon.

[McChook]

AUDM DC2 and JDM DC2 wheels have the SAME offset in the 5 stud 114.3 PCD

They WILL fit gen 5 VTiR

HOWEVER

If you have a 5th gen Si, and want early JDM DC2R 4 x 114.3 wheels, they WILL fit 4th gens AND 5 Gen Sis with the 4 stud wheels

Hope that helps

AND YES, I have JDM DC5 Type R wheels on my car. AUDM DC5 R 16inch wheels will NOT fit on 5th Gen preludes without a spacer

[MWAKU]

Anyone know the exact PCD of prelude rims and dc2r rims (Both AUDM)???

Well i know stud pattern is 5x114, but what offsett are each? preludes 55, what about the audm dc2R? and 15"x?

[I heart the SSS]

There is no real set offset for a car.

As long as it's resonable, it'll fit.

Even if it's a 0, you can make it fit.

But try to keep it sane :)

[safetycar]

Stock Prelude 16's are 16x6.5 +55.

Check: http://www.preludeonline.com/f84/recommended-tire-sizes-offsets-107797/ for guidelines on different widths/offsets.

[jesmine0]

And the offset of DC2R is +42 while offset of DC5R is +38.