JDM 96 SPEC INTEGRA BRAKE INFORMATION semi urgent...

[Alexplicit]

hey guys.

i just had a look at my brakes and i have formed slight stress cracks. so im trying to upgrade to slotted rotors through my work. but finding it quite hard to find information on the brake rotor/pads due to it being an import.

i need the diamater and width. so i can tell the dba lady :P

or part numbers for DBA.

also need to know what pads to be getting

thanks guys.

[Alexplicit]

i just had a quick google search and came up with this. can anyone confirm its correct

Front

4x114.3 PCD (same as the wheels obviously)
21mm thick (ventilated)
262mm in diameter.

Rear

Rear Discs are also 4x114.3
242mm diameter
Solid (non ventilated)

[vinnY]

front and rear are the same spec as the regular dc2(dimensions wise)

though the centre bore is 64.1mm and of course 4x114.3

I got fed up trying to look for direct replacements I ended upgrading to 98spec callipers and using prelude/accord rotors

[will88]

you can use the front slotted rotors off the BB4 prelude(282mm) thats what im using atm of my 4x114.3 setup and with 98 ITR calipers.

[vinnY]

^ I'm sure he's rocking 96spec callipers though

[jdm_kid]

- One option is to get a regular 4x100 integra VTi-R rotor and have a machine shop re-drill it to a 4x114.3 stud.

That is probably the best option, i remember if you order from JDMyard they can supply the DBA rotor pre drilled already.

They can prob sort out your brake pads also at the same time.

[trism]

If you wanna go thru DBA direct, im pretty sure they can custom drill

[Alexplicit]

how hard is it to change to 98 calipers. and is it just a matter of finding a 98 aus spec integra brake calipers or is there more parts i need?

[Alexplicit]

bump becoming urgent

[vinnY]

just need prelude vtec disks along with dc2r brake calipers+brackets that's it

[Alexplicit]

so basically i have to scrap my entire brake setup?

what about the rears?