Denso Oxygen Sensor for B18C7

[anzai]

i'm thinking of buying a replacement o2 sensor for my dc2r. after a bit of reading i've decided to buy a denso replacement o2 sensor, but i was reading information for USDM ITRs..

so i was wondering if anyone could confirm that this part would also work on AUDM B18C7's:

Denso Part #: 234-4011

http://www.densoproducts.com/resultsSearch.asp?s=9&txtPartNumber=234-4011

from this website it says that its good for b18c5, so im guessing it should be good for b18c7 as they are essentially the same motor

thanks heaps

[anzai]

bump anyone?

[DC2-PWR]

Denso is good stuff I think Repco stocks Denso,

or just go Autobarn and get the 02 bosch sensor they have. Neither Bosch or Denso will have the same wires so you have to rewire them anyway

I have the wiring for the Autobarn one, if Denso is the same then this will help a lot.
http://www.aa1car.com/library/o2sensor.htm

Just scroll down the Codes, DC2/4/R ones are the Honda 1.

If your smart with wiring you'll be fine, if your not then it will just take some trial and error.

Good luck

[anzai]

thanks for the link, but i was told that im better off buying motor specific ones...

ill be buying it from ebay because its only 70 dollars shipped, almost 50% cheaper than if i was to get the universal ones locally..

but yeah i just need to make sure its the right part for my motor

[DC2-PWR]

thanks for the link, but i was told that im better off buying motor specific ones...

ill be buying it from ebay because its only 70 dollars shipped, almost 50% cheaper than if i was to get the universal ones locally..

but yeah i just need to make sure its the right part for my motor

If your really that picky getting motor specific ones then why arn't you getting OEM? Thats the real deal :p.

The headers I bought were the RMF headers made in the US, for B18C1/C5. And my "OEM"(:p) dc2r sensor fits it. So you shouldn't have any dramas I believe.

Good luck bro,