OEM Type R style rocket cover (B series)

[boyjkl1111]

:wave:

First of all, this is my very first time to do the OEM type R style rocket cover. Before i do, i have searched a bit. Here is some something u might need to make that happen:

1. VHT red wrinkle plus paint
2. Paint Stripper
3. Small steel brush
4. sand paper 400 800
5. Sanding Block
6. Gloves
7. Exacto knives
8. painter tape


OK. here we go.
here is my Poor JDM B16A
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0522.jpg

take off the cover and unplug the spark plug
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0546.jpg

here is my tools
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0555.jpg

!!!remember !!!
before u apply the paint stripper, take off the rubber gasket, otherwise will destroy the rubber gasket. Also, wear gloves when u do that, it will burn ur skin.

here is the pic after the paint stripper using steel brush to take off the old paint.
quit nice huh?
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0556.jpg

using sand paper 400 first, then 800. clean it, then using hit gun, u guys can skip the hit gun section. point less. lol
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0558.jpg

using painters tape cover the spark plug holes and other small holes. And now u can apply the painting.
http://i1211.photobucket.com/albums/cc424/boyjkl1121/2ajcm7t.jpg

here is the result.
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0561.jpg
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0560.jpg
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0559.jpg
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0562.jpg
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0565.jpg
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0566.jpg
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0564.jpg
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0563.jpg
http://i1211.photobucket.com/albums/cc424/boyjkl1121/wsqtmg.jpg

now u can take the rocket cover to the oven. i set 120 degree for 30 mins
http://i1211.photobucket.com/albums/cc424/boyjkl1121/2cgiq8o.jpg

put the rocket cover back to the engine, oh don't forget the rubber gasket. lol
here is the last step for polishing the DOHC VTEC HONDA text using the sandy block!!!

all done.! ! isn't that easy??!!
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0523.jpg
http://i1211.photobucket.com/albums/cc424/boyjkl1121/sfl9qw.jpg
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0567.jpg
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0569.jpg



:thumbsup:VTEC YO! :honda: 本田就是牛逼！
http://i1211.photobucket.com/albums/cc424/boyjkl1121/rocket%20cover/IMG_0513.jpg

[EG_VI]

Awesome DIY ill give it a shot see how mine goes :)

[boyjkl1111]

Awesome DIY ill give it a shot see how mine goes :)

Good luck yo. lol

[EG5VTI]

Great D.I.Y. Very helpful :)

Also love the s2000 cluster!

[boyjkl1111]

Great D.I.Y. Very helpful :)

Also love the s2000 cluster!

thx bro. post urs when u finish. lol

[ninzee]

nice write up man
ay just outa curiosity does the temperature gauge work on your cluster cause myn just says its overheating, n is your fuel gauge accurate?