Some questions about after Dyno of my EF9

[hoyin3132]

Hi guys,

just done a dyno run today n it shows that i got 89.91Kw,

Is it a normal Kw?? Or my engine is starting to lose power??

My Mods:

Jap B16A
Port Head n intake,
YS1 Gear Box
Mugen 4-2-1 Exhaust Manifold
full 2.25" Exhaust system
Spoon ECU (Remix A/F ratio to 13.2~13.7, Vtec early kick in at 5,100rpm n cut at 8,900)


Is it a normal Kw that I should get??

Thanks guys

[dougie_504]

Not bad, some B16A's only make 85kw atw depending on their health. I'd only get worried if it were less than 85kw. Also depends on the dyno, but IMO it should be making between 85-100kw.

Do a compression test mate. Each cylinder should be making 190-220 if it's a healthy engine.