View Full Version : Honda INTEGRA VtiR new engine cost?
DeFl0wEr3d
10-06-2011, 07:37 PM
I have a 1994 VtiR INTEGRA and most likely bent the valves ruining the engine, got quoted for 2300-2500 for a fix. I'm just thinking if anyone knows a good specialist to install just a new block itself with low kms every other part I have in the car is fine.
If anyone knows roughly how much it would cost, would be appreciated thanks.
dougie_504
11-06-2011, 12:07 AM
Valves are in the head. You need either new valves or a new head lol. And $2300 is a rip off to replace valves.
Get any VTEC B-series head (preferably OBD1). B16A2 head, B18C2 head, B18C7 head... all will do the job.
But if it were me I'd just get the valves replaced with OEM ones. From a good mechanic it shouldn't cost more than $1000-1500 surely.
RSKEbaby
11-06-2011, 04:29 PM
Ive got a b18cr head ready to go, if you want. pm me :)
$2500 valve repair/replace is a joke when you can get a new head for a fraction of the price.
GSi_PSi
11-06-2011, 05:26 PM
If he's bent the valves. Pistons could be damaged , cylinder walls could be cracked all sorts of problems , not just a simple head or block swap. Have you opened it up and inspected the motor yourself or this just a piss fart quote from mechanic?. Depending on your budget and intentions you could get a replacement short motor , rebuild your engine , build a b20vtec etc . So need to get this information first
Lukey
11-06-2011, 05:40 PM
how did u manage to bend the valves?
timing belt snap?
RSKEbaby
11-06-2011, 07:19 PM
bent valves = overheating? isnt etttt
dougie_504
11-06-2011, 10:54 PM
I think he dropped his car into 2nd gear instead of 4th gear at like 120km/hour from 3rd gear (might have read this in another thread).
Lukey
11-06-2011, 11:36 PM
compression lock up?
mocchi
13-06-2011, 09:51 PM
I have a 1994 VtiR INTEGRA and most likely bent the valves ruining the engine, got quoted for 2300-2500 for a fix. I'm just thinking if anyone knows a good specialist to install just a new block itself with low kms every other part I have in the car is fine.
If anyone knows roughly how much it would cost, would be appreciated thanks.
how much what would cost? no one here have the slightest idea what is the damage.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.