Guard Rolling

[omagic]

I've been getting quotes of $60 a corner for getting my guards rolled, just wondering if anyone can beat it.. Done a search and found some members have the roller and are charging a bit less and doing a great job as well, however one member that had a good reputation is now banned.. haha

So yeah anyone know anyone?? I'm from the campbelltown area.

[dougie_504]

I've had quotes for $50 down in Melbourne so $60 isn't so bad. And be careful getting it done by an amateur you don't want your paint to crack of course.

[flipfire]

7day tyres at parra charged me $35 a corner. He fkd up the paint a little on a corner cause he rolled it too quick, not noticeable from the outside though.

[Nepolian]

Can be anywhere between $40-$60 per corner. Remember that most are mobile and considering that it isn't too bad. Paint on older cars will flake/crack, no matter how much they heat it. Its widely known that most guard rollers will not accept responsibilities for the cracks and they will tell you before they roll.

[Cartoon]

as long as your guards dont get warped our out of shape like mine did :(

[blastnpast]

Pm jdmeg5

[jdmEG5]

pm sent already thanks blastnpast!

Rolling and flaring is different. Flaring insists of a higher risk of damaging the paint. Some hardcore flaring may need some body work.

[babiiiiiiiiiii]

its depending but its about 40-60 a corner , i know this guy is doing it and he come to you man , but you need to BOOK him up coz its way too busy!! pm if you need it

[Cartoon]

i had mine rolled, pumped and flaired hence why they buckled a little.

[dlai5552]

I got Phill B enterprises to do it!
Highly recommended, awesome guy and it's cheap too (well I paid $180 but there was a special on I think)
No paint chips.
http://www.phillbenterprises.com/

OR, Dedi at Top One does a great job too!

[-unknown-sss]

A guy from Gumtree does it for $30 a guard and is mobile. Based in Liverpool to Cabramatta region i think. Helps out with Martins cars and seen him at Ground Zero. Here is a link. Hope that helps.

http://sydney.gumtree.com.au/c-Business-Services-other-business-services-30-Guard-rolling-s13-s14-rx7-skyline-180sx-silvia-soarer-civic-W0QQAdIdZ295352882

[mugen_ctr]

as long as your guards dont get warped our out of shape like mine did :(

me to man, rolled it a little bit, than outta no where, the guards started to take another form of its own LOL... oh well, its not like u spend 90 percent of the time looking at it anyways :D

[WATAJK]

I paid $150 for my rear guards to be rolled by Gavin @ LOWDOWN Guard Rolling.
Very happy with the job he did on my DC5 guards, didn't crack my paint or leave ripples.
He's been doing it for 7 years so he knows what he's doing.
He's based in Greenvale, if your keen let me know.

[IV73CI]

Ring up these guys,

http://sydneyguardrolling.com.au/

ask for Nelson ...he does mobile jobs too ..

he did mine as flared as he can get without any paint damage watsoever.

he will also tell you the maximum u can go depending on the condition of the paint job and guards (if there are signs of bogging repairs or rust).

cant remember the price but he came to my joint and rolled the shit out of my guards so i can fit my 18x8.5 wheels at the time and dropped it on its ass. :)