**projector retro-fitting**

[dc292177917]

hi mates

as u might know that the AUDM sols are the only one using separated hi and lo beams
low in the normal housing and the high in the little circles
which the little circles are for the fog lights in JDM and USDM and they hv both hi and lo in the normal housing...

to express it more clearly i should say this
lo beam - in normal housing - using ONLY low beam filament of the H4 bulb
hi beam - in "fog light" housing - using ONLY high beam filament of the H4 bulb

i m just wondering if i can jump the wire to the normal housing to make it like...
highs on with lows off in the normal housing, while keeping the high signal in the fogs

i m looking to do this becoz i m very interested in doing a facelifted front conversion
which has the foglight holes deleted and making the front end more streamlined

heard someone has done this b4 and a relay diagram is needed but the link is broken
just wondering if anyone knows how to make a relay that will do the job

if the above is unclear...
if flicked to hi-beam:
keep the hi-beam signal on in the fog housing,
jumping the hi-beam signal to the normal housing while cutting off the low-beam signal in the normal housing
when in low-beam:
everything normal

any commands appreciated
----------------------------------------------------------------------------------------------------------------------------------------------
after some serious consideration
realized it's not worth it to mess with the relay and wiring shits...
and kind of inspired by wt this website (http://hidillusionz.blogspot.com/2008/08/honda-civic-del-sol-si-fx35-retrofit.html) done to the del sol
i will do it, and do it in a better way
one aim: OEMness and OMGness
for u who dont know me
i m a guy that will spend wt the best i can afford for lighting
bit of researching and sourcing
i decided to do a bi-xenon retro fit
atm i m still waiting for the clear housing to come
but from the pictures u shud be able to get the idea
i ll make a DIY write up when everything's done and 100% working
this will be applicable to cars with H4 or H7 housing with a bit of DIY
subscribe if u r interested, will start the DIY soon lol
http://i4.photobucket.com/albums/y127/derektl_chan/discuss/IMG_1979.jpg
http://i4.photobucket.com/albums/y127/derektl_chan/discuss/IMG_1981.jpg
to be fair both 45W and 55W bulb were using the same model of 55W ballast
http://i4.photobucket.com/albums/y127/derektl_chan/discuss/IMG_1983.jpg
lovely cut-off line

[dc292177917]

bump.....
anyone knows anything? cheers

[dc292177917]

bump.....
anyone knows anything? cheers

[androo]

Hi mate,

I'm in the process of doing the same! Except I've ordered some new projectors because the stock ones are all faded. Once they come I"ll be connecting everything up. I've shaved the bumper including the number plate mounting points. I'll post up pics once its all done and I'll let you know about the wiring.

Not sure if you can wait that long though! But I'll keep you posted.

[sxmachine]

I'll be doing the same once my hi/low beam hid kit comes but I'll be keeping the original high beam lights and running them like fog lights...

[androo]

I'll be doing the same once my hi/low beam hid kit comes but I'll be keeping the original high beam lights and running them like fog lights...
How will you be wiring it to trigger both high beams (as in, the fogs and the normal high beams at the same time)?

[dc292177917]

How will you be wiring it to trigger both high beams (as in, the fogs and the normal high beams at the same time)?

that's exactly wt i want to do
it seems many del sol lovers hv the same opinion abt the hi lo beam configuration lol
it's so good to hear someone doing the same!!

[EG5VTI]

Updates!?

[Snoop_gee]

Hopefully this may be of help

I had junk crx projection halo headlights laying around and had a set of brand new one piece del sol headlights. Take the crx ones apart with a heat gun and a screw driver, take the projector and halos out of the crx headlights (a few screws) then open up the del sol lights the same way with a heat gun. You have to modify the projector brackets to make them fit (they bend) then use emblem glue to the halos to the projector brackets. Run the wires out and conect to power to check. Put everything back together and seal it all up. This is how I did mine, me simply telling you how I did my own modification I am in no way liable if you break/and or destroy your headlights or your car.
Hope this helps

http://farm6.static.flickr.com/5022/5557050346_b5b3171577.jpg

http://farm6.static.flickr.com/5016/5557050680_e6b8b4a232.jpg

[dc292177917]

awesome work mate but how did u work out the relay thing? (hi's on with low's off)
i hv been thinking of using the headlight relay out if a EG but dont know if that's possible
googled a lot but cant find anything abt the EG's headlight relay...

[Snoop_gee]

I didnt mess with that its just a stock bulb behind the projectors

[dc292177917]

i think i will do the projector conversion to skip the asspain rewiring :D
well this page has helped my decision a lot
http://hidillusionz.blogspot.com/2008/08/honda-civic-del-sol-si-fx35-retrofit.html
still thinking whether to do with or without the halo ring tho lol

[dc292177917]

kind of updated

[dc292177917]

how the projectors turned out lol
http://i4.photobucket.com/albums/y127/derektl_chan/discuss/IMG_2015.jpg
http://i4.photobucket.com/albums/y127/derektl_chan/discuss/IMG_2022.jpg
http://i4.photobucket.com/albums/y127/derektl_chan/discuss/IMG_2037.jpg

[Snoop_gee]

a job well done.
Looks the goods.

[Snoop_gee]

Your del sol reminds me of Louis btw.
with the EM1 wheels.
http://www.redpepperracing.com/gallery/d/191334-3/pic+001.jpg

http://www.redpepperracing.com/gallery/d/191383-2/pic+017.jpg

[dc292177917]

omg...
i reali want to get a lip for my sol after seeing that pic...