***Official What did you do to your Integra today***

[Super-DA9]

^^ that's looking really good man. great job.

[Dubstein]

^^ that's looking really good man. great job.

ily sda9

[ericl33]

very neat looking car m8.

where did you get the dashmat?

[EKVTIR-T]

exterior is naice

dashmat is senior citizen spec

[ericl33]

exterior is naice

dashmat is senior citizen spec
get fkd m8, I'm trying to cover up airbag hole.

[simply.shredded]

you're back, simply shredded disappear....

sooo dubstein is actually a user. i see.

nah simply shredded is still here eric :)

[Dubstein]

very neat looking car m8.

where did you get the dashmat?

superest cheaps autobahns

[ericl33]

simply shredded had location cairns an hour ago.

lol

you don't fool no one.:p

[CivicEGSI]

I can vouch m8

[Dubstein]

I don't even live in cairns :(((((

[Lukey]

omg a dashmat! i want one!!!

[EKVTIR-T]

omg a dashmat! i want one!!!
groce!

if I see at meet I'll remove it and set on fire

[CivicEGSI]

lol ****

[Dubstein]

groce!

if I see at meet I'll remove it and set on fire

The reflection in the car was immense so the dashmat helps me see, i have 15% vision left btw...

[EKVTIR-T]

The reflection in the car was immense so the dashmat helps me see, i have 15% vision left btw...
you used 2 bottle of armourall on dash thats why

[Dubstein]

you used 2 bottle of armourall on dash thats why

I use that shit on my steering wheel

[Lukey]

you used 2 bottle of armourall on dash thats why

i use bottle of autoglym on mine

[Evok]

you used 2 bottle of armourall on dash thats why

I can refer to that

But i like shiny stuff...

[Evok]

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/599655_10150836905876290_1494616383_n.jpg

BWR Frame with Type r 22m RSB

[charliebrown]

^ busy towing

Dat tork

[ericl33]

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/599655_10150836905876290_1494616383_n.jpg

BWR Frame with Type r 22m RSB
inb4bent

[blastnpast]

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/599655_10150836905876290_1494616383_n.jpg

BWR Frame with Type r 22m RSB

Looks great, won't bend when installed correctly Savesthatsubframe

[nate92]

Inb4subframefallsoff

[Lukey]

nice jack stands

[Dubstein]

Safety first!

[ericl33]

Vietnamese way, no worries.

[Dubstein]

Viet as fck

[Indie]

Hm, well, it seems that my antenna no longer retracts all the way... I guess this means it's S2k/Shark Attack II time.

[Evok]

The languages and vocabulary that goes around these days Is more scarier then using bricks as jack stands.

[Indie]

The languages and vocabulary that goes around these days Is more scarier then using bricks as jack stands....clearly!

[Evok]

http://ihgritch.files.wordpress.com/2010/09/troll.jpg

[Lukey]

pulled out the car alarm that hasnt worked since i bought the car
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/543195_10151798213150696_1123980601_n.jpg

pulled the tow bar off
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/542380_10151794954620696_862999267_n.jpg

pulled scuttle tray off and snapped it in the process, found where water was leaking into my passenger footwell. need a new scuttle tray or to make a new seal for the spare one i got

[ericl33]

m88888

srs, you know I want.

[Lukey]

youre not willing to pay price i want

[ericl33]

no one is.

but I'm willing to pay the higher than anyone else.

[Lukey]

i can give u part number if u want

[ericl33]

i can give u part number if u want
pm meprice , srs.

none of this gimme an offer.

[Lukey]

i already told u my price before

[ericl33]

i already told u my price before
I forgot, pm me again plz

[r3ckless]

replaced my blown LED for the climate control.

[Lukey]

u already said its to much, and thats how much its worth to me

[Super-DA9]

I forgot, pm me again plz

is this for the tow bar? lol

I'm removing the one from my EG4, dunno if it fits DC2 as well haha.

notsureifsrslywantstowbar..

[na-118]

inb4bwr strength vs function 7 and asr

[ericl33]

is this for the tow bar? lol

I'm removing the one from my EG4, dunno if it fits DC2 as well haha.

notsureifsrslywantstowbar..
doesn't fit, lil bro got eg5 with towbar, I checked already.

[ExpressCoffee]

replaced my blown LED for the climate control.

My orange one went out, where did you get a bulb?!

[Super-DA9]

doesn't fit, lil bro got eg5 with towbar, I checked already.

fuaark that sucks.

[na-118]

inb4hydrolockrebuildloljkes

[Evok]

inb4bwr strength vs function 7 and asr

Your Internet slang ..
Big price range differences between the 3 lol

[nate92]

Your Internet slang ..
Big price range differences between the 3 lol

Lol you pay for quality, if you want cheap you get cheap stuff

[mocchi]

u already said its to much, and thats how much its worth to me

250 was it?

cot daym

[CivicEGSI]

cot daym

[Dubstein]

http://i.imgur.com/BKFlq.jpg

dam replicas

[Super-DA9]

http://i.imgur.com/BKFlq.jpg

dam replicas

Oh dear...

[nate92]

farrrk GG how u going to get that shit off!

[na-118]

GG who did you buy replicas from! hahaa bad luck bro

[na-118]

bwr 190
asr 240
function 7 280


substitute for quality?


Your Internet slang ..
Big price range differences between the 3 lol

[Lukey]

got my exhaust tucked up over my rear lca, have a what feels/looks like a bit over 1/2 and inch of clearance now, probably be less if i get a new lca/weld it up

will probably contact again when i go lower haha

[Evok]

bwr 190
asr 240
function 7 280


substitute for quality?

$40 can get me 10 litres of petrol and 2 pork rolls. Craving.

[ericl33]

http://i.imgur.com/BKFlq.jpg

dam replicas
fkn LOOOOOLLLL

[ericl33]

gg who did you buy replicas from! Hahaa bad luck bro
bwr....

[Dubstein]

GG who did you buy replicas from! hahaa bad luck bro

egsi haha, cant go wrong with $30.. saves me paying 60+ for replicas or 100+ for legit.. Ill buy real ones on next pair of rims

[CivicEGSI]

egsi haha, cant go wrong with $30.. saves me paying 60+ for replicas or 100+ for legit.. Ill buy real ones on next pair of rims

Next time torque with breaker bar ;)

[Dubstein]

Next time torque with breaker bar ;)

get fkd this is my thread

[CivicEGSI]

come at me m8

[Dubstein]

come at me m8

rude p

[ExpressCoffee]

Changed my old watery tail lights to new ones !
The old ones were so dirty!
http://img.tapatalk.com/7caa3439-3010-d7d3.jpg
http://img.tapatalk.com/7caa3439-319a-a688.jpg
So much water..
http://img.tapatalk.com/7caa3439-31b3-d54c.jpg
Sanded back and touched up the paint..
http://img.tapatalk.com/7caa3439-31d6-c05e.jpg
http://img.tapatalk.com/7caa3439-3271-e081.jpg
What a difference! Looks heaps better already. ( yes I did both of em )

Any of you guys put silicon on the lights to seal it? If so, where??

[dc2screama]

Changed my old watery tail lights to new ones !
The old ones were so dirty!
http://img.tapatalk.com/7caa3439-3010-d7d3.jpg
http://img.tapatalk.com/7caa3439-319a-a688.jpg
So much water..
http://img.tapatalk.com/7caa3439-31b3-d54c.jpg
Sanded back and touched up the paint..
http://img.tapatalk.com/7caa3439-31d6-c05e.jpg
http://img.tapatalk.com/7caa3439-3271-e081.jpg
What a difference! Looks heaps better already. ( yes I did both of em )

Any of you guys put silicon on the lights to seal it? If so, where??

Did you use the same gasket seals?..
If you didn't just silicone the crap out of the back of the light, use the black urethane..

[ericl33]

silicone, sighhhh


Buy neoprene sheets from Clark rubber and use old seals as template to cut out.

[charliebrown]

Or just drill some holes down the bottom to let water out. cost you nothing but a little time and electricity

[ericl33]

Or just drill some holes down the bottom to let water out. cost you nothing but a little time and electricity
pm CB auto for this service.

[GSi_PSi]

come in me m8




rude p




http://www.youtube.com/watch?v=wXw6znXPfy4

[Indie]

Or just drill some holes down the bottom to let water out. cost you nothing but a little time and electricityHa, I remember when I kept telling you to do this, and you were asking me to post pics of the holes I'd drilled, because you were worried about hitting a globe or something... And I just kept saying "seriously mate, just drill some tiny bloody holes, it's easy!" It cracks me up seeing you giving the same advice now after all that uncertainty! I'm guessing the holes worked for you. :P

[CivicEGSI]

http://www.youtube.com/watch?v=wXw6znXPfy4

M8, gt fkd

[Dubstein]

Dont silicone LOL

[Super-DA9]

Dont silicone LOL

just stickerbomb instead.









































natsrs.

go with ericl33's idea, cheap, easy and proper way to fix.

[ExpressCoffee]

Or just drill some holes down the bottom to let water out. cost you nothing but a little time and electricity

The bottom where and how small exactly? This wouldn't let any moisture in would they?


Did you use the same gasket seals?..
If you didn't just silicone the crap out of the back of the light, use the black urethane..

I used the seals that came with the new lights, they were i much better condition.


silicone, sighhhh


Buy neoprene sheets from Clark rubber and use old seals as template to cut out.

Didn't think of that, noooice.

[Indie]

The bottom where and how small exactly? This wouldn't let any moisture in would they?No, the water drains out. Water will not get in. Just small holes, maybe 5mm wide, to let the water escape and to prevent condensation. The bottom of the outer plastic, as low as possible. Basically, where the water is pooling.

[ExpressCoffee]

No, the water drains out. Water will not get in. Just small holes, maybe 5mm wide, to let the water escape and to prevent condensation. The bottom of the outer plastic, as low as possible. Basically, where the water is pooling.

Ok thank you mate :)

[dc2r-0636]

No, the water drains out. Water will not get in. Just small holes, maybe 5mm wide, to let the water escape and to prevent condensation. The bottom of the outer plastic, as low as possible. Basically, where the water is pooling.

First post u have made actually helping some1 rather then correcting grammar or questioning why u would do something.
You're still a **** sucker tho :)

[nate92]

Lawl!

[Indie]

First post u have made actually helping some1 rather then correcting grammar or questioning why u would do something.
You're still a **** sucker tho :)Rather THAN correcting grammar. You type like a 12-year-old girl.

[dc2r-0636]

How do u know how 12 year old girls type? Been tryin chat em up lately ?

[EKVTIR-T]

Rather THAN correcting grammar. You type like a 12-year-old girl.


How do u know how 12 year old girls type? Been tryin chat em up lately ?
Reported.

The Australian Federal Police Cyber Taskforce has logged a record of this chat along with the IP addresses of the participants due to potential violations of Aus. law reference no. 2334453436.
Your IP address has been entered into our suspect database and may be sent to Child Protective Services.

http://upload.wikimedia.org/wikipedia/en/c/c8/Australian_Federal_Police_Association_Logo.png

[nate92]

GG yoo

[ExpressCoffee]

Was reading up on leaking CMC's today and it got me worried.. So i Looked at mine and I noticed it covered in grease. Not brake fluid. Is this worse? :/

[dc2r-0636]

Was reading up on leaking CMC's today and it got me worried.. So i Looked at mine and I noticed it covered in grease. Not brake fluid. Is this worse? :/

If its covered in grease it could be the old owner spraying wd40 on it to get rid of the squeaky clutch pedal

[ExpressCoffee]

If its covered in grease it could be the old owner spraying wd40 on it to get rid of the squeaky clutch pedal

My clutch still has a slight squeak but the grease was like dark grey and the whole cylinder was covered in it! Just wondering if I need to replace or not...

[dc2r-0636]

How's ur clutch fluid reservoir ? Do u lose oil ?

[ExpressCoffee]

How's ur clutch fluid reservoir ? Do u lose oil ?

I checked it for te first time last week and it was on the low line, so I topped it up..

[charliebrown]

I checked it for te first time last week and it was on the low line, so I topped it up..

Just top it up now and mark where you topped up to. Then check it every day and if it's going down then could be the CMC, but if it's not leaking then why change it. They're not cheap and time consuming to change.

When you top it up did you bleed it?

[ExpressCoffee]

I topped up barely anything now. And no, i didn't bleed it. I assumed that was only when you flush the system?

[Super-DA9]

if its losing fluid its going somewhere, it's not like it "uses" fluid so to speak. so if it dropped to "Min" then it is leaking somewhere, most likely the master cylinder.

an easy to spot sign of a leaking master cylinder is seeing leaked fluid where the shaft connects to the clutch pedal inside the car, or on the firewall around the cylinder itself.

[ExpressCoffee]

Right, I'll check that soon. So how long can I go on with it leaking?

[mocchi]

***Official What did you do to your Integra today***

is now

***Official Diagnose my Integra today***

[ExpressCoffee]

***Official What did you do to your Integra today***

is now

***Official Diagnose my Integra today***

http://media.tumblr.com/tumblr_lpkrnqUesQ1qer4nm.gif :p

[Dubstein]

Got that lug out, wasn't even hard!

[nate92]

How u do it?

[Dubstein]

How u do it?

Chisel and hammer, rim has like minor scratches.

[nate92]

I stripped the rear interior and gave her a wash,,

Pics will be up soon

[Vvvtec]

Why'd you strip the interior?

Srs question, not trying to be smart :)

[ericl33]

Why'd you strip the interior?

Srs question, not trying to be smart :)
inb4bcosracecar



I had stripped interior for many years.



got over it.

[Setanta]

Washed it and vaccumed it - perfect day for it :) Now I don't want to take it out in case the bloody white wheels get dirty :S

[Spunkymonkey]

Washed it and vaccumed it - perfect day for it :) Now I don't want to take it out in case the bloody white wheels get dirty :S

well low and behold Pete, you have a type r now? you and white wheels :p just stick to any other colour and it doesn't matter if the brake dust gets them dirty :p

[nate92]

Why'd you strip the interior?

Srs question, not trying to be smart :)

Theres a high pitch squeak in the rear somewhere. One rear speaker has blown aswell so i thought to take everything out and fix it today. I replaced the speaker and found teh squeak it was a loose bolt i the boot area.

[Setanta]

well low and behold Pete, you have a type r now? you and white wheels :p just stick to any other colour and it doesn't matter if the brake dust gets them dirty :p

Lol Q - yup :)

Update: bought Brand new Type R mats as spares - totally stoked with them :) I also got the red hook that stops the driver's side one from slipping :)

http://forum.clubitr.com.au/attachment.php?attachmentid=4234&d=1338713868

http://forum.clubitr.com.au/attachment.php?attachmentid=4236&d=1338713868

http://forum.clubitr.com.au/attachment.php?attachmentid=4237&d=1338713868

[Lukey]

spent 1550 on buying various parts

[ericl33]

spent 1550 on buying various parts
still b18b

lolwut

[Evok]

still b18b

lolwut

somean

[Lukey]

still b18b

lolwut

silly fanboys

[Evok]

What you end up buying?

[Lukey]

oem parts -
pcv valve & grommet
vrs kit
bottom end gasket/seal kit
water pump & bits
tail light gaskets
bonnet -> bumper seal & clips
scuttle tray -> bonnet seal & clips
timing belt
timing belt tensioner & bits
fuel filter & bits + extra bits for fuel filter i already has
clutch master cylinder & seal
thermostat & seal
rear timing belt cover

short shifter
reservoir covers
better ecu to use for hondata
heat proof I/M gasket
arp head studs

[Evok]

A lot of things indeed!
I got myself a P2R IM Gasket today as well along with a nice cheap $18 dollor fuel filter from repco..

Shooked my old fuel filter and pieces of rust and shit came out...

[ericl33]

Washed it and vaccumed it - perfect day for it :) Now I don't want to take it out in case the bloody white wheels get dirty :S
ohh chit, now I know what type R you have.....

belated congrats m8.

[Lukey]

A lot of things indeed!
I got myself a P2R IM Gasket today as well along with a nice cheap $18 dollor fuel filter from repco..

Shooked my old fuel filter and pieces of rust and shit came out...

mines going on 95,000kms/5 years since its been changed, i cant even imagine what mine will be like

[nate92]

installed aftermarket radiator and samco blue hoses, new fuel filter and new thermostat

[Dubstein]

Today i joined the 200000+ club

[charliebrown]

Today i joined the 200000+ club

its a gsi man, they go hard and stay hard

[nate92]

I got 1000 to go till I join!

[Apu]

Well not today but yesterday...Goodridge braided brake lines. Didn't bleed the brake lines properly so a little spongey, but wanted to save the marriage so will let a mechanic finish it off!

Also fitted a few blingy bits - oil cap, solenoid cover and wheel nuts from Works Engineering.

[Pr3Z]

I have 70k till I can join haha ;)

Bought a shark attack II, waiting on delivery. Also gave the entire car a clean inside and out, so much nicer.

[Dubstein]

installed aftermarket radiator and samco blue hoses, new fuel filter and new thermostat

pics on bay pls

[nate92]

pics on bay pls

here is some pics, looking for a new strut brace now

http://i295.photobucket.com/albums/mm159/fineoner/360217b6.jpghttp://i295.photobucket.com/albums/mm159/fineoner/ece744ec.jpg
http://i295.photobucket.com/albums/mm159/fineoner/6abf6d17.jpg

[ericl33]

that's my spark plug cover m8.

[CivicEGSI]

Looks clean, heat shield could use lick of paint, nomsayin

[skeptic_]

Lol Q - yup :)

Update: bought Brand new Type R mats as spares - totally stoked with them :) I also got the red hook that stops the driver's side one from slipping :)

http://forum.clubitr.com.au/attachment.php?attachmentid=4234&d=1338713868

http://forum.clubitr.com.au/attachment.php?attachmentid=4236&d=1338713868

http://forum.clubitr.com.au/attachment.php?attachmentid=4237&d=1338713868

How much and where did you get your type r mats from? I'm keen to buy some for my vti-r but i don't know how much to pay for a set and where to find brand new ones?

[Evok]

Ballin with samco hoses. I nearly cried when i brought a upper radiator hose for $40 from mekong spares


How much and where did you get your type r mats from? I'm keen to buy some for my vti-r but i don't know how much to pay for a set and where to find brand new ones?

Ebay sell some fitted ones for integra's or there is a a set of second hand type r ones for sale in thread somewhere

[SpoonS]

Test fitting

Before
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/s720x720/602496_10150998416604510_789887033_n.jpg

After
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/318096_10150998416374510_880106102_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash3/181353_10151000726089510_1972798207_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/229838_10151000725799510_602488642_n.jpg

[Lukey]

little bit more work to go but im pretty much done. so good to have tunes again

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/309322_10151857912135696_1503265122_n.jpg

[dc2screama]

little bit more work to go but im pretty much done. so good to have tunes again

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/309322_10151857912135696_1503265122_n.jpg

What's are you using to block the headunit space? block off plate..

[Lukey]

What's are you using to block the headunit space? block off plate..

yea i got an oem off yonas, i may look into putting gauges in it, not to sure yet

[dc2screama]

Something different, nice

[GSi_PSi]

yea i got an oem off yonas, i may look into putting gauges in it, not to sure yet

what happened to your carpet?

[EKVTIR-T]

yea i got an oem off yonas, i may look into putting gauges in it, not to sure yet
You got ripped man.

$35 shipped http://www.ebay.com/itm/OEM-Honda (http://www.ebay.com/itm/OEM-Honda-99-00-Civic-Si-EX-EK-B16-Double-Din-Radio-Block-Off-Delete-Plate-Cover-/180842194646?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item2a1b08e6d6#ht_2472wt_952)

[Lukey]

what happened to your carpet?

it hasnt been in for years.


You got ripped man.

$35 shipped http://www.ebay.com/itm/OEM-Honda (http://www.ebay.com/itm/OEM-Honda-99-00-Civic-Si-EX-EK-B16-Double-Din-Radio-Block-Off-Delete-Plate-Cover-/180842194646?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item2a1b08e6d6#ht_2472wt_952)

****

[ExpressCoffee]

Just wrote off my Integra today.. :(

[Lukey]

ouch.

[nate92]

Just wrote off my Integra today.. :(



farkkkkkkkkk how>?

[Dubstein]

undasteeeerrr

[ExpressCoffee]

farkkkkkkkkk how>?

Had a really exhausting day and was driving home late.. Fell asleep for a few seconds and hit a street light.

Car didn't look too bad after all that though..

[nate92]

geegee

[Setanta]

How much and where did you get your type r mats from? I'm keen to buy some for my vti-r but i don't know how much to pay for a set and where to find brand new ones?

A lot (but well worth it - don't really want to go into the amount) and private sale, I spotted them on a 'teg forum.

The price I paid was well worth it even though my set in my car are in great condition - but showing a little wear on the driver's side. Plans are to put a scuff pad on the existing ones and use these as display mats.

[circuit_DC5]

http://i196.photobucket.com/albums/aa229/tangtang888/243683_10151071058199439_1067445200_o.jpg

[Evok]

Just wrote off my Integra today.. :(

Unlucky :(....That after feelng..


-

Jdm front! Love it.

Deciding wether to get rid of the side skirts and go oem with mudflaps or keep.... Need opinions
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/299326_10150278113351290_1385869990_n.jpg
This is a old picture

[Setanta]

Little update:
Bought a few things as I'm on holidays for two weeks - gotta love teaching. Actually, I need it as the transmission on the E30 is whining at 80km/h :(

The windows were binding when raised and looking at the rubber channels/surrounds I could see it was a bit dirty and dry. OCD time kicked in and out with water (no soap) to clean the channels and mist/wipe down the area that the glass touched with silicon lubricant (no comments thanks :D ). Problem solved and the glass moves quickly and the motors no longer strain at the half-way point.

Brand new mats being the most expensive but well worth it for me. These are more backups/display only as the original driver's side cops the heel of my shoes - now I can get a protector pad put on them and not stress over taking away from the factory look (I have a "factory look" mindset from the days of my EF9 - mods as long as it can be reverted to stock).

http://members.iinet.net.au/~setanta/dc2r/DSCN0182.jpg

New radiator cap as the Cusco's rubber was looking a bit average. Not leaking, but pre-emptive replacement. Socks to pretty up the engine bay and contrast to the yellow and a certain red clip that came with the mat.

http://members.iinet.net.au/~setanta/dc2r/DSCN0185.jpg

Cap on

http://members.iinet.net.au/~setanta/dc2r/DSCN0190.jpg

Socks on and looking pretty but looking at the photos I see a bit of dirt around the ridge of the master cylinder. I was going to get the cotton buds out tomorrow to clean down a few bits tomorrow and have added this to the list (OCD sucks big time!).

http://members.iinet.net.au/~setanta/dc2r/DSCN0191.jpg

Engine bay wiped down with a clean cloth, didn't come back dirty other than a touch of oil off the blanked off turbo oil line on the sump - tightened the clamp and cleaned it up. Wiped down the hoses etc and closed the bonnet before I went nuts.

http://members.iinet.net.au/~setanta/dc2r/DSCN0193.jpg

Ok so on to the item that I was most excited about. What I loved about my EF9 SiR was how it was so superior to any Aussie delivered Honda (bar the NSX) of it's time and even through the Aussie EGs and EKs. Little things like "Oh your mats are slipping? Here, we'll hook it in place for you". The 'tegs mats did this too and it's been annoying to scrunch over the bolster and have the mat ruckle up (especially when you are a short-arse and have the seat close to the wheel :D ).

Enter the mats complete with red hook. Ok, maybe not the metal one in my EF9 but a plastic one - and DC2R's all being about lightweight... plastic makes sense right? Well anyway time to fit. Pretty obvious except that googling the fitting so I didn't wreck the carpet only brought back a few hits on USDM hooks for their ugly mats. The premise was the same and looking closely, Honda had pre-cut 90% of the carpet and a quick 1cm cut was all that was needed to access the mount behind:

http://members.iinet.net.au/~setanta/dc2r/DSCN0187.jpg

Push the tab into the mounting point and it clicks home

http://members.iinet.net.au/~setanta/dc2r/DSCN0188.jpg

Mat over the top:

http://members.iinet.net.au/~setanta/dc2r/DSCN0189.jpg

and now I can get in and out without the map ruckling up.

http://members.iinet.net.au/~setanta/dc2r/DSCN0195.jpg

Then I notice the dirt etc on the carpet and get the vacume out only to have my daughter scold me for getting too caught up in the car and that I should be spending time with her. :)

Probably overly detailed for small things, but I figured why the hell not :)

[dc2r-0636]

^^
That is awesome!!! I'm sick of pulling my matts back all the time

[Lukey]

http://cdn.memegenerator.net/instances/400x/22888964.jpg

[GSi_PSi]

Looking good Setanta, should do a work log in the appearance gallery or something, im sure more than a few would appreciate it.

I think i saw your car at the HCCNSW meet, car looked awesome but there was one thing that quite bugged me and that being the chopped up front bar
i think it was chopped cause of the intercooler?..if there was a way to plastic weld that black piece for the front bar, the car would be perfect

[Setanta]

Yep, I haven't pulled the bar off to see how it was done, but I kind of like the mesh there (although it does pick up leaves :D ). TBH, if I was going to go the black plastic insert I'd have to buy a complete new bar (because I couldn't stand a second hand one) which would then blow out to "hmmm... maybe I should track down a brand new JDM front end" which I can't quite justify ... yet :)

[DC2-PWR]

Great to see Deano's old car getting more love, keep up the good'ol work mate

[Bludger]

Pete, where did you get the clip for the mats?

want to get one for partner's car.

[Setanta]

It came with the mats. I'm actually wondering if Honda Japan have them in stock still (mats they don't). If not, the USDM Acura ones use a screw-in setup and I have a feeling that might be another avenue to go down

http://i446.photobucket.com/albums/qq189/330R_photo/112-1210_IMGMedium.jpg
http://i446.photobucket.com/albums/qq189/330R_photo/floormat.jpg

USDM parts list
83605-S30-A00 Holder, Floor Mat
90662-SB2-003 Grommet, Screw
93904-45320 Screw, Tap 5x16

HTH

[Super-DA9]

^^
That is awesome!!! I'm sick of pulling my matts back all the time

wait, so not everyone has the hook? I thought it was in all DC integras?

[Leee]

^
nope i dont think everyone does because i dont have one either..
im really annoyed with pulling them back in position too
ill probably ask artarmon honda and ill post up if they do sell them

[Dubstein]

Got my Provisional 1 license lolzarz..

[ExpressCoffee]

Got my Provisional 1 license lolzarz..

Is that just P's? lol


I'm getting my written off teg back for an afternoon to take out all parts to replace with stock ones. :/

Anyone need Recaros?

[nate92]

How much for recaros?

[p3akin]

decided to put my engine up for sale

[Vvvtec]

decided to put my engine up for sale

wynnyng

[dc2screama]

decided to put my engine up for sale

K swapping?

[ExpressCoffee]

How much for recaros?

1200 but OzHonda price 1000 ;)

They're seriously mint though.

[charliebrown]

1200 but OzHonda price 1000 ;)

They're seriously mint though.

Ill give you $50 pick up right now

[ExpressCoffee]

pm'd.

[Super-DA9]

pm recieved

[Vvvtec]

typing pm

[p3akin]

K swapping?

nope.. selling car my car

[Lukey]

more parts

[GSi_PSi]

typing pm

thinking of typing pm

[Vvvtec]

nope.. selling car my car

without a motor?

[newpaddy3]

thinking of typing pm

Thought of typing pm, decided not to.

[p3akin]

without a motor?

got jdm dc2r engine for it

[HauLe_]

something sightly different
http://farm8.staticflickr.com/7123/7541646894_dd1ebc7b2c_z.jpg

[newpaddy3]

I see green p plates all the time, not really that different.

[EKVTIR-T]

Groce wing

Hey is that soot on your bumper?

[HauLe_]

I like the wing but we all have different taste

No thats just my rear lip being burnt by my exhaust as it sat too high but thats all fixed now

[Indie]

When's your next track day?

[mocchi]

When's your next track day?

saturday night princess highway bro

[dc2r-0636]

It's actually Friday nights :p

[Indie]

saturday night princess highway broSick, I'll bring my tow hook and rear strut brace.

[typerdevil]

Got some goodies coming in either today or tomorrow:
Beaks Lower tie bar
Spoon Spark Cover (Carbon)
Rear Strut brace
Spoon Reservoir Covers
and more to come soon....

[nate92]

My car finally hit the big 200 mark

http://i295.photobucket.com/albums/mm159/fineoner/bc8e10b1.jpg

[viinnh]

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/306742_3883396656957_355110438_n.jpg

my side skirts were black (Coz GSI) so bought 3$ primer and gloss white aussie export LOL (povo style) turned out alright colour actually kinda matches IRL

[Indie]

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/306742_3883396656957_355110438_n.jpg

my side skirts were black (Coz GSI) so bought 3$ primer and gloss white aussie export LOL (povo style) turned out alright colour actually kinda matches IRLAre you planning to spray your side moulding, or shave it?

[viinnh]

Are you planning to spray your side moulding, or shave it?

Shave it

[Vvvtec]

Shave it

nice! wasn't the plan to scrap this shell though?

[viinnh]

yeah but will be my daily till end of the year so i just wanna have a nice looking car for now,
just planning on painting it wheere these black lines are
http://i47.tinypic.com/33ernfa.jpg
and gonna try to blend it, buff it do w/e because of that line above it i think it should play a trick on the eye ?

well if it doesnt turn out good still better then having the strips

[Indie]

yeah but will be my daily till end of the year so i just wanna have a nice looking car for now,
just planning on painting it wheere these black lines are
http://i47.tinypic.com/33ernfa.jpg
and gonna try to blend it, buff it do w/e because of that line above it i think it should play a trick on the eye ?

well if it doesnt turn out good still better then having the stripsI was thinking of shaving, but then I realised all the respraying that would be required, so I'm thinking I'll just spray the strips VTi-R style. Are the difficult to get on and off?

[Dubstein]

Be careful when taking off.. I did mine and it just kinks everywhere. Had to buy new oem ones, dam expensive too..

I like the trim look

http://i.imgur.com/e0fAa.jpg

[dorikin]

get type-r doors already shaved

[Dubstein]

get type-r doors already shaved

still have to do the rear quarter panel :3

[viinnh]

hardest one would be the first one from the front

nah, type r doors are CW, id have to respray it either way

[TEK]

Broke the my teg's resonator, too lazy to get a replacement on top of that my K&N filter has now a melted section (due to the filter touching the engine bay). So took out the K&N POD filter replaced it with the original box filter and then converted the resonator into a ducted airbox system.

So on Saturday midday to afternoon, My friend and myself took off the bumper and did this
http://byteki.com/misc/IMG_0451.JPG
http://byteki.com/misc/IMG_0452.JPG
http://byteki.com/misc/IMG_0453.JPG

[Pr3Z]

Washed and waxed the Integra, installed new shark attack II antenna and fixed my exhaust. Goooooood day.

http://img829.imageshack.us/img829/6310/screenshot2012071819423.png

[newpaddy3]

Washed and waxed the Integra, installed new shark attack II antenna and fixed my exhaust. Goooooood day.

http://img829.imageshack.us/img829/6310/screenshot2012071819423.png

I've got one of those too!

Good work.

[nate92]

Did u just get the kit? Or the extension?

[Pr3Z]

Just the kit, didn't bother with the extension :)

[Cr0wbar]

Just installed a couple of these bad boys from Deal Extreme. They're the largest parkers I could find:
http://photoserver.ws/images/mtQG500f4fccb508a.jpg

And this is the result. I'm quite happy with the light output, but they look blue-ish in the photo. They're more white in person.
http://photoserver.ws/images/IKc5500f4fcd10093.jpg

[Dubstein]

I have some plans for my car, but its a secret so shush.

[99ITR]

changed my driver side recaro bolster yesterday. feels so much better now just gotta learn how to use these seats now that it's functioning properly ><

[Dubstein]

Replaced piston bearings :c

[dc2screama]

Serviced

[Johnie]

S2k seats in my dc2 :) only drivers been fited for now, sorry taken photo with my iphone :/
http://i296.photobucket.com/albums/mm187/ju4t_0wn3d/428890_10150988599652102_572887804_n.jpg

[Dubstein]

They dont look as dishy as the teg ones :/

[simply.shredded]

They dont look as dishy as the teg ones :/

where you been dubby

[meatball]

sneak peak of whats going in my teg..
http://img338.imageshack.us/img338/7504/59960843696420423061217.jpg (http://imageshack.us/photo/my-images/338/59960843696420423061217.jpg/)

[Dubstein]

where you been dubby

ded :(

[dorikin]

Freshened up a few nuts and bolts

http://img528.imageshack.us/img528/5954/img3549x.jpg

http://img824.imageshack.us/img824/1792/img3553si.jpg

[sammutn90]

where do u get those shark attack atenna i looked everywhere!

could use send me a link on where to buy

thanks

[newpaddy3]

where do u get those shark attack atenna i looked everywhere!

could use send me a link on where to buy

thanks

http://2.bp.blogspot.com/-HE2gwOJZaSs/T48VZd0vZJI/AAAAAAAAAs8/1hSZnjG4LyM/s400/Jackie-Chan-WTF-meme-face-70958233396.jpeg

First Google result goes straight to the product...

http://www.locustom.com/shark2_kit.htm

[Super-DA9]

sprayed birdshit off the bonnet.

[Lukey]

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/394745_10151967524085696_1276794912_n.jpg

[Vvvtec]

lolwut

remove your resonator while your at it.

[Lukey]

it is removed, it just the bit in the fender thats still there haha

[Lukey]

i also rubbed thru the inside of my front guard when driving before pulling the engine

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/487706_10151967675125696_827858056_n.jpg

[Goku]

bought myself a integra today. :) really proud of it!! although its a gsi not a vti-r. :)

[Dubstein]

bought myself a integra today. :) really proud of it!! although its a gsi not a vti-r. :)

Welcome to the gsi club :P

Adjusted stereo fuse, now it doesn't drop out on me over bumps thank fuk

[Goku]

Welcome to the gsi club :P

Adjusted stereo fuse, now it doesn't drop out on me over bumps thank fuk


Thanks mate!! Just gave my baby a good wash and buff!!

[Johnie]

^Goku is ur gsi gunmetal grey?

I was gonna wash my dc2 today but it rained you cna see how dirty it is.., at least the 34 is clean but

http://i296.photobucket.com/albums/mm187/ju4t_0wn3d/417569_10151004334177102_1206308769_n.jpg

other then that, s2k seats are in, and doing the jdm front conversion now, just finding some1 who can weild, Currently in my garage Starting to removing the front end and will be going on my daily grey dc2
This black dc2 in photo will be stripted or sold after i finished with getting all the goodies :)
and you can see in background my other dc2 witch is also being stript. So i got plenty of parts if any1 needs anything lol
http://i296.photobucket.com/albums/mm187/ju4t_0wn3d/487672_10150998583372102_601642527_n.jpg

[89lude]

What's wrong with the black one for you to take parts off for the grey one?

[Johnie]

Ii
What's wrong with the black one for you to take parts off for the grey one?
Engine making knocking sound and rego ran out

[soisyamum]

Yesterday I installed Hasport 88a engine mounts, the rear one was a bitch to get out. pretty happy with them! very solid! but vibrates everything! the whole car just shakes! hopefully it will settle down once they wear in?

[Super-DA9]

Yesterday I installed Hasport 88a engine mounts, the rear one was a bitch to get out. pretty happy with them! very solid! but vibrates everything! the whole car just shakes! hopefully it will settle down once they wear in?

I have innovative 60A's so I don't know how much difference there would be regarding wearing in, but they do settle a LITTLE bit but not much. you just need to get used to it.

[Latino CRX]

finally after 3 months sittin in garage gettin rebuilt and everything all fresh and new
today i finally done the final touches of bolting in the baby capsule and seat harness
brackets :) .. its been hell driving the Commodore for last 3 months lol even tho its supercharged
its still not my honda lol

[Goku]

^Goku is ur gsi gunmetal grey?

I was gonna wash my dc2 today but it rained you cna see how dirty it is.., at least the 34 is clean but

http://i296.photobucket.com/albums/mm187/ju4t_0wn3d/417569_10151004334177102_1206308769_n.jpg

other then that, s2k seats are in, and doing the jdm front conversion now, just finding some1 who can weild, Currently in my garage Starting to removing the front end and will be going on my daily grey dc2
This black dc2 in photo will be stripted or sold after i finished with getting all the goodies :)
and you can see in background my other dc2 witch is also being stript. So i got plenty of parts if any1 needs anything lol
http://i296.photobucket.com/albums/mm187/ju4t_0wn3d/487672_10150998583372102_601642527_n.jpg

Yes it is johnie! whys that? i love the look of your grey teg :)

[dorikin]

Rebuilt P/S pump and fully cleaned :)

http://img801.imageshack.us/img801/720/img3748a.jpg

http://img163.imageshack.us/img163/1203/img3753c.jpg

[viinnh]

http://i46.tinypic.com/bwily.jpg
got a free roof wing so just test fitted

adds a bit of character to a wingless car, need pods now

[93Integra]

Removed the resonator.. Love the new induction noise.

[EKVTIR-T]

Removed the resonator.. Love the new induction noise.
bwwwwaaaaaahhhhhhh

[Goku]

anyone know how to remove the rear windsheild washer? ive been trying to remove mine but it seems like its stuck or just really stubborn.

[dc2r-0636]

as in the washer on the roof ?

[Indie]

anyone know how to remove the rear windsheild washer? ive been trying to remove mine but it seems like its stuck or just really stubborn.The wiper?

Pop the black cap off with a screwdriver (which can be stubborn), unscrew the bolt underneath, and remove the blade. Then you need to remove the interior plastic (wedge it off with a screwdriver, and you need to pull it quite firmly for the clips to unclip). There will be three small screws connecting the motor to the hatch, and a wire that requires a good yank to unclip. Don't worry about breaking the interior clips or the wire, they all require a bit of force to pry loose, but won't break. Press your interior back into place, and that's it. There will be a hole left in the glass which simply needs a rubber grommet to plug. I found one at a hardware store that fits perfectly. It looks very clean, now.

Good luck with it!

[JDM DC2R]

Realigned my rear bumper. looks ten times better

[Vvvtec]

Stared at my engine bay for about 15 minutes geeing myself up for swapping this k24 in lololol

[Goku]

as in the washer on the roof ?

yeah the washer on the roof :)

[Goku]

The wiper?

Pop the black cap off with a screwdriver (which can be stubborn), unscrew the bolt underneath, and remove the blade. Then you need to remove the interior plastic (wedge it off with a screwdriver, and you need to pull it quite firmly for the clips to unclip). There will be three small screws connecting the motor to the hatch, and a wire that requires a good yank to unclip. Don't worry about breaking the interior clips or the wire, they all require a bit of force to pry loose, but won't break. Press your interior back into place, and that's it. There will be a hole left in the glass which simply needs a rubber grommet to plug. I found one at a hardware store that fits perfectly. It looks very clean, now.

Good luck with it!

thanks mate. i'll try it once i get home haha. probably going to paint the blades since they are a bit faded. :)

[Super-DA9]

Stared at my engine bay for about 15 minutes geeing myself up for swapping this k24 in lololol

you never answer my question haha. WHEN IS THE B18C2 COMING OUT?

[Vvvtec]

you never answer my question haha. WHEN IS THE B18C2 COMING OUT?

Haha shit sorry dude.

Honestly dont know man :( Hopefully in the next 3 months haha

[Lukey]

in the progress of a basic engine bay wire tuck with MRGRIM

[Johnie]

Replacing my stock side skirts with aftermarket ones, and replace my prefaced rear bar with my facelift one with rear pods looks much neater only problem is i didn't paint it so bar is black and my car is gummetal grey lol... oh well

[tripleuse]

Stared at my engine bay for about 15 minutes geeing myself up for swapping this k24 in lololol

hahaha i was the same

[eLtrix]

replacing my seats with jdm ones....

tommorow:
replace stock cluster with jdm cluster
replace side mirrors with jdm power folding mirrors/motors
replace the aircon dash? the shit with all the settings for the aircon stuff
replace passenger/driver windows
replace rear/front window....
install central locking

put in original jdm fog lights

anyone keen on helping? :P

[Latino CRX]

today i broke my bonnet cable soo looks like im busy again 2moro :p ...
and also stuffed around with the VTEC Controller and took it for a cruise :)

[Dubstein]

Nice work guys :) Keeping the thread alive hahaha

[eLtrix]

Mounted some speakers.... completely different from what i intended to do.. fml T_T

[Latino CRX]

Nice work guys :) Keeping the thread alive hahaha

well we gota out power these civic and accord boyz hahah

[funworld]

Installed my k-tuned billet short shifter ... epic shiz

[Latino CRX]

just finished giving the bay all new earthing kit :)

[Lukey]

made engine noises

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-prn1/614463_3583741597134_899257322_o.jpg

[Dubstein]

brrruuuuummaaawwwarrr

[DCZ 18C]

Hey guysi remember a couple guys on this post having some issues with leaking tail light gaskets. Just thought. Wold put it up here that m putting in an order for some sets . I have a thread up if you guys wanna have a look or pm me for more info.. :)
Keeping the selling in the thread :) just informing you guys :)

[charliebrown]

Ill never understand why people wanna pay that much and go through the trouble of opening the lights up when you can just drill holes for free in 10 minutes.