Taking the inside of the euro apart

[jonolee]

yooooo :wave:

i want to add some kw's by installing neons in my euro :D i had ago tonite and firgured i'd use a switch which will be placed in the ash tray but the problem is i can't get things apart! how do i take the front console off, how do i reach the cig lighter wires, i went from around the side on the passenger seat but no luck. I can take the ash trash easily, just not everything else

i'm still pretty new at electrical work i only know how to solder on stuff, make a switch work and where to connect wires to but bad at finding power sources and wires which are in the car

oh and for future use on how to take the front console apart, cause i'm thinking of installing my own deck not 100% sure yet but i like learning but not the hard and expensive way

plz help, my car could use the extra boost :rolleyes:

[learner]

you have to
1.take off the cover where the hand-break is first... there are 4 clips to hold tat in place... you just have to pull it up... (""very carefully"" otherwise you will break the cover)
2.then take off the cover of where the stick is... there are 4 clips also...
3. after taking off tat and take off the ash trash... you will see there are 4 screw holding the cig lighter parts (2 at the top and 2 at the bottom)... unscrew them then you can take it off very easily

......here is the document that have info how to take it off...
http://www.handa-accessories.com/tsx/08A0308B06.pdf

i have put neons in mine... but doesnt feel too good... so i took them off...
r u goin to put under car neons???
post some pic after u fini.

[EuroAccord13]

I must however, warn you that they are all a tight fit... so beware not to break anything....

[jonolee]

yea well if i don't like them i can always turn them off heh
but yea i'm putting under car neons soon, i rekon luxary cars look really nice with under body neons. i dun care bout rice too much, its my car if they don't like it then they can look the other way