View Full Version : EK4 front brake set up + hubs, knuckles etc - bolt on to eg?
jdmEG5
01-07-2011, 07:45 AM
Hey guys,
im looking to upgrade my front brakes on my eg, i got a mate that is selling front complete brake set up from an ek4 so just wondering if it easy bolt on ?
Thx
EK4/EG6/DC2/EM1 etc are all interchangeable from the hubs, brakes rear trailiing arms etc.
LCA and sway bars differ between the EG/DC and EK/EM.
jdmEG5
01-07-2011, 08:02 AM
Ah! Thanks Tai.. So i can just use the rotors and calipers without changing everything else ye?
quangsuke
01-07-2011, 09:30 AM
sorry mate it wont work like that. your eg will have 242mm rotors as the ek4 will have 262mm. u can't just swap the rotors u need to change the entire hub to support the upgrade in size.
kcokla
01-07-2011, 10:36 AM
not trying to hijack the thread, but is is handbreak line interchangeable?
existing drum break set up to a disc break setup.
mugen_ctr
01-07-2011, 11:25 AM
not trying to hijack the thread, but is is handbreak line interchangeable?
existing drum break set up to a disc break setup.
handbrake lines are not interchangeable, you will need the disc brake lines for disc.
dorikin
01-07-2011, 05:56 PM
you will need the hubs + knuckles as well.. and probably good idea to upgrade the bmc, booster and prop valve
I would honestly just get a 282mm setup if you're spending the money.
jdmEG5
01-07-2011, 11:59 PM
$100 is what im paying..
Thanks for the reply guys
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.