b18c7 pcv valve

[anzai]

hey guys, im trying to change my pcv valve on b18c7

just wanna make sure this is the one?

http://img824.imageshack.us/img824/2122/pcvx.jpg

cheers

[dc2screama]

Sure is mate

[anzai]

that was quick. to change it do i just pull it out or would i need to hold the hose underneath the manifold so it doesnt fall off while im putting in the pcv valve?

thanks

[DLO01]

Theres a hose at both ends. You'll need to hold it. Also when you put it back on you'll need to feed or hold the hose from underneath.

[lsvtec]

all i can say is have fun

[anzai]

thanks deano.

fun will be had. i have nfi how im supposed to hold that hose from the black box. fml

[nugget]

im quite sure the pcv valve is the one with the blue hose end....

[DLO01]

No. The PCV valve is where the red arrow is pointing in the original post.

http://i13.photobucket.com/albums/a265/DLO01/Temp/accord_pcv_657b.gif

http://upload.wikimedia.org/wikipedia/commons/c/c3/Pcv_valve_1.jpg



http://www.google.com.au/imgres?imgurl=http://upload.wikimedia.org/wikipedia/commons/c/c3/Pcv_valve_1.jpg&imgrefurl=http://en.wikipedia.org/wiki/File:Pcv_valve_1.jpg&usg=__Ewn8-O-85Un6ID3DA671qn2nkFs=&h=334&w=377&sz=43&hl=en&start=0&zoom=1&tbnid=UmTI8RXTdSv7bM:&tbnh=150&tbnw=160&ei=-YIVTuqoCqz4mAWR7u0r&prev=/search%3Fq%3Dhonda%2Bpcv%2Bvalve%26um%3D1%26hl%3De n%26client%3Dfirefox-a%26sa%3DN%26rls%3Dorg.mozilla:en-US:official%26biw%3D1261%26bih%3D617%26tbm%3Disch&um=1&itbs=1&iact=hc&vpx=181&vpy=253&dur=1693&hovh=211&hovw=239&tx=143&ty=107&page=1&ndsp=15&ved=1t:429,r:5,s:0http://www.google.com.au/imgres?imgurl=http://upload.wikimedia.org/wikipedia/commons/c/c3/Pcv_valve_1.jpg&imgrefurl=http://en.wikipedia.org/wiki/File:Pcv_valve_1.jpg&usg=__Ewn8-O-85Un6ID3DA671qn2nkFs=&h=334&w=377&sz=43&hl=en&start=0&zoom=1&tbnid=UmTI8RXTdSv7bM:&tbnh=150&tbnw=160&ei=-YIVTuqoCqz4mAWR7u0r&prev=/search%3Fq%3Dhonda%2Bpcv%2Bvalve%26um%3D1%26hl%3De n%26client%3Dfirefox-a%26sa%3DN%26rls%3Dorg.mozilla:en-US:official%26biw%3D1261%26bih%3D617%26tbm%3Disch&um=1&itbs=1&iact=hc&vpx=181&vpy=253&dur=1693&hovh=211&hovw=239&tx=143&ty=107&page=1&ndsp=15&ved=1t:429,r:5,s:0

[mrmango]

update me how hard it is, mines making a squeaking noise :/

[bennjamin]

Isnt on a b16a and b18c7/1 the valve just pulls out from the top. The pipe below to the oil seperator is held inplace by a grommet -Use pliers and make sure you don't bend the rubber pipe too much as it will be brittle

[glen06]

its really hard coz of the hot oil makes it like plastic..anyway what i did to mine was cut it off from the bottom and change the hose. top one is easy..bottom one is a pain!!