VTECnique
11-07-2011, 08:06 PM
Ill cut a long story short. There was a noiuse coming from the front brake pads so i took them out to check them, fitted them back in. Went for a drive and brake pedal went straight to the floor with a little pressure. So then i came back bled the brakes n it still was doind the same thing.
So then i though it couldve been a seal in the master cylinder, had that rebuilt. fitted that back on bled the brakes again then took it around the blocked. I had more engine compression then i did brakes!!
So now that we have ruled out the master cylinder, im trying to think what else it could be. there are absolutely no leaks anywhere the calipers are fine n i ve checked the lines several times for cracks/spilts etc. Could there be another explanation as to why the pedal is still hitting the floor? its really starting to piss me off n as like most of you, its my only way of transport so id like to get this rectified asap. cheers guys...
So then i though it couldve been a seal in the master cylinder, had that rebuilt. fitted that back on bled the brakes again then took it around the blocked. I had more engine compression then i did brakes!!
So now that we have ruled out the master cylinder, im trying to think what else it could be. there are absolutely no leaks anywhere the calipers are fine n i ve checked the lines several times for cracks/spilts etc. Could there be another explanation as to why the pedal is still hitting the floor? its really starting to piss me off n as like most of you, its my only way of transport so id like to get this rectified asap. cheers guys...