Need help... EG Twin Carb bike filters stalling

[XEV790]

Hi
I Just did the DIY

[hmetro24]

Do you mean it idle around 2k while in P. and 1 k when it is on Drive?
Did you warm up the car.

[XEV790]

Yes ^ and that's warmed up,

[hmetro24]

Yes ^ and that's warmed up, i changed one of the vacuum tubes around also adjusted the idle screw ( Park now at 1.5 and drive just under 1k), seems to be running smoother...
Cross fingers for the drive to work tomorrow
You can drive it to work no problem with that, but check you vaccum lines. Also if it idle at around 2k rpm, what is the rpm when start the car?

[hmetro24]

I uploaded A manual for you, I had hard time to adjust the idle on my old d15b4. It was pain in the A88. What you can do :
1- Warm up the car untill it idle as low as possible
2- you have 2 screws, one on each carbie, play with it a little bit, do not screw it more than 1/4 spin each time.
3- check your rpm with a/c off and a/c on.
Until you have 700 +-50 rpm

[viinnh]

check all your hoses man
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/248885_1912761712315_1640077132_1882018_2980608_n. jpg

see where you taped yours ? mine has a hose

[viinnh]

re looped it