jazz usdm 06-08 front grill fit on 03 jdm jazz

[KenZ_]

Was wondering if this front grill would fit on my 03 gd jazz.

http://www.ebay.com.au/itm/06-08-HONDA-FIT-JAZZ-FRONT-HOOD-MESH-SPORT-GRILLE-GRILL-/250856631377?pt=Motors_Car_Truck_Parts_Accessories&hash=item3a68386c51

thanks

[melvin]

If im correct I think our '03 fit corresponds with their '06 fit because the US got the fit a bit later than us. Seeing as it says its for 06-08 they it should fit.

At the same time I think you'd need to change your front bar because the OEM one doesnt allow for the middle part to come out separately unless you cut it :)

Hope that helped.

[GU357]

^no.

The usdm ones are all facelifted models (facelift happened in 06) where as the JDM 03 model is prefacelift, so the grills are different.

and with an 03 model the grill can be popped out if the whole front bumper is removed and theres some clips on the back if i remember right.
and with the 06 ive heard that it can be taken off fairly simply too.
'

it doesnt matter where the jazzs are if they are 06 on wards they are facelifted. end of story.
unless u buy an 05 model which is of the 06 body style.

[melvin]

OK so this wont fit his 03 Jazz??

[GU357]

most likely not.
since all US models are 06+ which means they are all facelifts.
where as the 03 isnt a facelift.

and i have been told that between the two, the grills cant be exchanged.


btw how did you get a JDM jazz in Australia?
or you mean u have one of the Japanese made ones, but you bought it from a honda dealer over here?
if its made in Japan and Honda shipped it over here technically its AUDM because its designed for Australian, there fore Australian Design Market.

All Jazz's
below 06 are Japanese made
Above 06 are Thai made
but still, all of them are AUDM because they were designed for AU.
(other countries like the USA differ ie im not sure where they get their Jazz's from but either way they are still all face-lifted because of their yr)

[KenZ_]

ok cool ta everyone. (Yeh meant the AUDM one)

[GU357]

kool close the thread too if you know how. no point having anymore replies, like this one :P

[KenZ_]

dont know how to close the thread...