96 spec ITR brake and wheel bearing question

[Alexplicit]

hi guys,

im coming up to my first track day next weekend, and im sick of looking for brake discs, is there seriously no where in australia that sells discs?

is it correct that the VTIR pads will fit my car?

also, my wheel bearings are starting to get noisy what do i replace them with? vtir ones??

thanks :)

[e240]

'96 spec ITR brakes are 262mm - same as VTiR etc etc... You should be able to just get any 262mm 4x100 unles you're 4 x 114.5
I'd check with Yonas - he's been able to get odd stuff from RDA...LOL

[TODA AU]

96spec ITR is 4 x 114.5

[Alexplicit]

114.3***

[TODA AU]

:p typo, near enough.... Or did I just parrot type from Leonards post above?

[e240]

LOL - right..114.3...

Given the op did a comversion, he could've just used the calipers and retained 4 x 100
anyway, simple matter to redrill a 4 x100 to 4x113.4

[viinnh]

if cant find 4x114.3, redrill disc ?

[Alexplicit]

ok and as for the wheel bearing?

[mrcrvk24]

I need some info about wheel bearings too cant find any

[JPR28610]

All 4 stud dc2 use the same wheel bearing

[Alexplicit]

reviving my old thread...

since then, i luckily found another set of 96 spec rotors.... buuuut... i want to upgrade again, however i want ot keep 114.3.... CAN i, get a set of VTI-R rotors, and redrill them to 114.3?

[Tai]

Get prelude BB4 4x114.3 282 mm rotors, and get 98 spec dc2r calipers.

slight shaving involved but nothing that will affect the brakes negatively