Fitting hondata s300 into dc2r

[loveit]

Im wanting to buy a hondata s300 for my dc2r i found this on ebay http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=110714236460&ssPageName=STRK:MEWAX:IT. Will this suit my ecu on my dc2r in sydney??

Also im looking at fitting it myself has anyone posted up step by step information on how to chip my ecu for the s300 and where do i get the components for the chipping?? I tired to do a search but found it very confussing thanks for the help!!

[54VVA]

check these out:
http://www.hondata.com/s300socketing.html
http://honda-tech.com/showthread.php?t=1348457

[54VVA]

and you cant add a S300 to the DC2R P73 OBDIIa ECU.

http://www.ozhonda.com/forum/showthread.php?147215-hondata-s300-from-US/page2

[Super-DA9]

you need S300J for your current ECU, otherwise do what I did and pick up a P28 ECU. :)

[loveit]

you need S300J for your current ECU, otherwise do what I did and pick up a P28 ECU. :)

So if i purchase an s300j i can hook that up to my current integra typre r ecu?? Is this the best option for my car or are the better options??

[VTec1987]

Hondata s300 can only be installed into Obd1 ecu, you would need to purchase an OBd1 ecu ( p28\p30\p72) + 0bd2a to Obd1 conversion harness to work in your car

[loveit]

Hondata s300 can only be installed into Obd1 ecu, you would need to purchase an OBd1 ecu ( p28\p30\p72) + 0bd2a to Obd1 conversion harness to work in your car

Is this a good safe option to choose? I currently have headers, 2.5" exhuast with high flow cat, light weight flywheel, cold air intake. I want to get the s300 to get the most out of the current little mods i have done to the car and in the short future im looking at doin the cams. I just want to make sure the s300 with the obd1 ecu is the best most reliable option for me to take as the car is awesom at the moment all i want is a little more power??

[boboz81]

I have a dc2r with I/h/e and I took it to Toda to get cams,cam gears, valve springs and s300 installed tuned and the car is ALOT faster. Has power all through the rev range, even low down in 2nd. Made 132kw

[VTec1987]

Is this a good safe option to choose? I currently have headers, 2.5" exhuast with high flow cat, light weight flywheel, cold air intake. I want to get the s300 to get the most out of the current little mods i have done to the car and in the short future im looking at doin the cams. I just want to make sure the s300 with the obd1 ecu is the best most reliable option for me to take as the car is awesom at the moment all i want is a little more power??

To run hondata s100\s200\s300, you have to run it on OBD1 ecu, If you hondata s300 + p28, let me know

[VTec1987]

They ebay link is just for a hondata s300
I recommmend a professional to get this done ( last thing you want is to do something yourself and screwing it up and loose $500?)