PDA

View Full Version : Smooth K20 Swap?



spetz
09-08-2011, 03:36 AM
Hi guys,

I have been in 2 K swapped cars (K20A CRX and K24/20 EG).
Both used hasport mounts, but the cars vibrated so bad that the dash was shaking at idle.

Anyway, is it possible to do a K swap but keep a "factory" feel without too many vibrations?

Thanks

eg5civic
09-08-2011, 06:08 AM
Hasport mounts use solid bushes to mount the motor unlike factory mounts. The k swapped dc2 I went in had no shaking at idle or even though the rev range

When ordering hasport mounts you can order different "shores" in the mounts. I think 70a being the softest. These would be what you'd want

spetz
09-08-2011, 07:14 AM
I am not doing a conversion, I was just wondering out of curiosity.
So, the softest mounts will offer a factory type of smoothness?
Is a K20 a smooth engine?

Snoop_gee
09-08-2011, 07:31 AM
this is your 2nd kswap thread.
Civic + K20 swap = Stupid? (http://www.ozhonda.com/forum/showthread.php?153255-Civic-K20-swap-Stupid)
fingers are crossed that u will bite the bullet and make that bold and crazi decision.


http://img143.imageshack.us/img143/4690/img00521v.jpgP.S was it Sami's white del sol the kswap CRX (http://www.ozhonda.com/forum/showthread.php?150527-JDM-K20A-Del-Slow-Build-up)u were in?

zco
09-08-2011, 07:59 AM
No, not possible, even with softest mounts

r3ckless
09-08-2011, 08:39 AM
No, not possible, even with softest mounts

This. The other guy has no idea. Hasport mounts WILL VIBRATE. Its really not that bad man. and also the softest i believe is 62A. I have 62A in my DC5.

bennjamin
09-08-2011, 09:23 AM
its the nature of the engine layout - DC5/EP3 etc have a liquid filled mount to help cancel out vibrations (drivers side) - no such place for this on the DC/EK/EG/ED etc chassis.

fatboyz39
09-08-2011, 12:13 PM
I noticed with k20a vibrates alot more over a stock k24. K24 engines runs balance shafts in there oil pump which helps eliminate vibration from the engine hence a smoother idle/low end rpms. In our K24 DC2 road car you dont even notice it has a k24, idles nicely and drives like any other motor of course the tune has to be good to get that smoothness.

bennjamin
09-08-2011, 12:41 PM
I noticed with k20a vibrates alot more over a stock k24. K24 engines runs balance shafts in there oil pump which helps eliminate vibration from the engine hence a smoother idle/low end rpms. In our K24 DC2 road car you dont even notice it has a k24, idles nicely and drives like any other motor of course the tune has to be good to get that smoothness.

no doubt because it comes from purely a passenger car (IE comfort is essential) !

TheSaint
09-08-2011, 01:09 PM
man i wish i could afford to K swap my car =/

EG5
09-08-2011, 02:30 PM
When ordering hasport mounts you can order different "shores" in the mounts. I think 70a being the softest. These would be what you'd want

62a is the softest mounts.

GSi_PSi
09-08-2011, 04:03 PM
Jeev- He hasnt been in my car as far as i know lol, but my car doesnt shake on idle, idles normally and only shakes when giving it hard obviously.

Snoop_gee
09-08-2011, 07:44 PM
That now means. The k20 CRX would of meant the black gen2. CRX

spetz
10-08-2011, 02:35 AM
So a K20 doesn't have a balance shaft, just the K24?

Snop-Gee, I will admit it is extremely tempting and I would love a K20 EK or EM1, but not for a combined total of something like an Evo 6 TME.

GSi_PSi
10-08-2011, 10:34 AM
byp boys have an engine package for 8k, i dunno how much more simple it can get its not as expensive as they make it out to be.

Snoop_gee
10-08-2011, 11:46 AM
Snop-Gee, I will admit it is extremely tempting and I would love a K20 EK or EM1, but not for a combined total of something like an Evo 6 TME.
its a life changing experience to be owning, driving and even taking passengers.
All they seem to do is laugh and smile.

Here is a demo.

http://www.youtube.com/watch?v=CSRXSShotl0

89lude
10-08-2011, 12:22 PM
im running solid billet filled hasport mounts and my car doesnt even vibrate at idle. Maybe cause idle is set at 900? and yeah its a k24

u mad?
10-08-2011, 12:33 PM
anyone with aircon? vibrates like a MOTHER FUKER when the condenser kicks in at idle.

Benson
10-08-2011, 12:39 PM
anyone with aircon? vibrates like a MOTHER FUKER when the condenser kicks in at idle.

Most guys dont run a/c! I like K-swap with all the luxuries

zco
10-08-2011, 12:46 PM
is there any other components that make a car vibrate besides the oil pump that fatboyz39 mentioned ? (k24 vs k20)

89lude
10-08-2011, 12:57 PM
anyone with aircon? vibrates like a MOTHER FUKER when the condenser kicks in at idle.

this is probably why, i have no luxuries

GSi_PSi
10-08-2011, 04:58 PM
fuuuuuuuuu i want p/s and aircon... can it be done in crx delsol?

fatboyz39
10-08-2011, 05:13 PM
anythnig can be done.

trism
10-08-2011, 06:46 PM
p/s is easy, just use an electric p/s pump out of an Astra, or an MR2

A/C is also easy, just gotta make a custom bracket and get custom lines made.

Snoop_gee
10-08-2011, 06:59 PM
fuuuuuuuuu i want p/s and aircon... can it be done in crx delsol?

if u want p/s on a del sol u will need to notch the bonnet like hassy did.

http://img395.imageshack.us/img395/4004/1000649px3.jpg