View Full Version : Mugen Twinloop for DC2R
TweetR
12-08-2011, 08:16 AM
Hey guys just wondering if the mugen twin-loop catback fits directly on the standard exhaust system? Looking for something to fit standard system without having to do the whole system. Cheers!!
SuperJDM.
12-08-2011, 08:20 AM
my guess would be that youd need to change your cat to a JDM cat if you get a DC2R catback?
not too sure but that would be my guess
If your running the "Audm" header+cat then you would need to swap out the audm cat for a "jdm" cat or equivalent.
The audm cat is too long and if you did try to fit it using the audm cat, the flanges wont bolt up and the mugen twinloop will stick out a further 20cm or so (give or take a few cm)
90LAN
12-08-2011, 10:13 AM
you will need to change to jdm header and jdm cat
get a custom size cat to suit your audm header then buy a jdm triangle flange to suit so the exhaust shop doesnt hack your twin loop
DC2-PWR
12-08-2011, 10:56 AM
get a custom size cat to suit your audm header then buy a jdm triangle flange to suit so the exhaust shop doesnt hack your twin loop
Please remember to do this! Thankfully I did the same for my J's racing exhaust. Orelse exhaust shop would have chopped and welded some cheap shit on my new exhaust lol.
TweetR
12-08-2011, 12:37 PM
Thanks for th help guys! Yes im guessing i will need the jdm cat because im running the audm system. Where can i find a jdm cat? Cheers..
90LAN
12-08-2011, 12:52 PM
please read again even if you get a jdm cat it wont fit unless you get a jdm header too
TweetR
12-08-2011, 01:05 PM
Oh ok.. Thanks for the help. Recomendations on headers? Dont want something to loud..
mocchi
12-08-2011, 02:09 PM
Oh ok.. Thanks for the help. Recomendations on headers? Dont want something to loud..
i think sound is mainly defined via resonator, cat, muffler and your ear.
loud is a variable.
GSi_PSi
12-08-2011, 03:11 PM
Moey, if you wana go all out best header is Toda, but other than that best bang for buck
would be the RMF 4-1 Rep, or you could try the new Bisimoto Style B Series headers which apparently
provides the best gains but the collector is 2.75inch so you would need 2.75 inch inlet cat to 2.5inch outlet to
mugen twinloop catback
http://www.ebay.com.au/itm/RMF-style-B-SERIES-NARROW-HEADER-HONDA-ACURA-GSR-ITR-/270795032492?pt=Motors_Car_Truck_Parts_Accessories&hash=item3f0ca447ac
http://www.ebay.com.au/itm/Honda-Acura-Integra-Civic-CRX-Bisimoto-Style-Header-B20-/300565707722?pt=Motors_Car_Truck_Parts_Accessories&hash=item45fb1cbbca
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.