Light Weight Race Wheels

[THE 2BSEEN]

Hey wodering what every one is running for tack days and drags
I want to swap my 18s off for something lightweight for drags n sht, if can get some advice, sites prices and so on...........
Thanks to ALL :wave:

[simmy]

http://www.ozhonda.com/forum/showthread.php?114483-6UL-wheels-%28949-Racing%29-15x7-15x7.5-15x8-15x9-4x100-wheels-*JDMyard*

[bennjamin]

rememeber its not the weight saving that is a benefit (that isnt noticeable within the same size) but its the widths and offsets that can be a bonus to your cars handling - both in tracking and also tyre selection.

As above , start with JDMYARD and go from there. PLEASE avoid copy rims like rota etc.

[THE 2BSEEN]

rememeber its not the weight saving that is a benefit (that isnt noticeable within the same size) but its the widths and offsets that can be a bonus to your cars handling - both in tracking and also tyre selection.

As above , start with JDMYARD and go from there. PLEASE avoid copy rims like rota etc.

What do you recommend sizes for my 89 crx
biggest bad boy that will fit

[markismaximus]

On my ED I have run R888s (205/50/R15) on a 15x6.5 rim with zero scrubbing. Low but not stupid low.

Its also not so much what will fit but how much your speedo will be out. You need to keep within 3% overall diameter of your placard tyre size on the vehicle.

[vtecing]

Enkei RPF1

A good place to start if you want to get serious with drags try 9" with 235 tyres. If you wanna be a man and do some corners, go for 8" with 205 tyres.

[90LAN]

you just need the almighty regas in 15x6.5 or 7
one of the lightest wheels that would be best suited for your car

[dc292177917]

enkei RPF1
949 Racing 6UL
15X7 + 35
205-50-15

[THE 2BSEEN]

Thanks for all the help fellas, I think i will order some 949 racing wheels 15x8 +36 through JDMYARD.

[trism]

bob jane specials. 14x5