X-Force headers/extractors

[CAUSHN]

Hi all,

I was just wanting to know if anybody has had any experience in dealing with or using x-force headers/extractors and if so what could you tell me about the pro's and con's?????????????????

Thanks

[89lude]

They are good bang for buck. If you're on a budget they are worth it, the extra gains from say a toda header are not really worth the extra dollar over an xforce unless you are really pushing for every hp. you wont be able to feel the difference if you upgrade from an xforce either.

[CAUSHN]

Thanks heaps mate i appreciate your help.

you wouldnt happen to know the location of the store would you?

[TheSaint]

there has been a problem with one of the mounts on them that tend to crack and snap off - this is a big problem for the kit for the H22a (BB6 VTI-R)

personally i prefer to use ebay stainless headers for any D series or budget application and track down 5zigen for B series or full on builds

[dougie_504]

Covered many times before. Good value for your dollar if you can't find a decent JDM option. My brother is using them on his B18B2 (brand new) and we've had no problems at all. Another of my friends is using them on his JDM B16A. No problems.

[Fredoops]

Well for the euro anyway the xForce header is identical to the OBX (which is a ripoff of DC sports) that's for sale on eBay... That made me suspect they're out of the same factory in China, except obx is cheaper.. 40% cheaper

[Super-DA9]

I have a full XForce system and it's great! good welds and mandrel bends, nice gains too and great price. :)

[Benson]

They are good bang for buck. If you're on a budget they are worth it, the extra gains from say a toda header are not really worth the extra dollar over an xforce unless you are really pushing for every hp. you wont be able to feel the difference if you upgrade from an xforce either.

:thumbsup: