PDA

View Full Version : Noob question ! EG and other civic parts interchangeble ???



maxmx5
15-08-2011, 01:05 PM
hi there.

I am new to the forum and just wondering if the EG cluster is interchangeble with other honda out there say ITR DC2 ?? coz my cluster is playing up so need to replace it !!

and other body parts interchangeble with civic EK ?? I try do a search spend a bit of time reading througt some of the post but did not get anyware !!
so help please !!

maybe someone can shoot me a alink somewhere on this forum ?

cheerss

meatball
15-08-2011, 01:09 PM
need to rewire if u wanna use the ITR cluster.

no they arent interchangeable with ek. people use the ek sideskirts, but u have to shorten and drill new holes to fit eg

maxmx5
15-08-2011, 01:27 PM
need to rewire if u wanna use the ITR cluster.

is that a hard thing to do ?? I dont really care about anything else its just a track car. all i need to is get the techo working properly !! u think best to get a civic EG cluster ??

dc2r-0636
15-08-2011, 01:31 PM
whats playing up on your cluster before you go and buy another one ?

if its tacho, its your ICM in the dizzy

redefine
15-08-2011, 01:37 PM
SOME of the parts are interchangeable between ek and eg, but pretty much none of the body parts are. only things like engine bay parts and some sussy parts

maxmx5
15-08-2011, 02:14 PM
whats playing up on your cluster before you go and buy another one ?

if its tacho, its your ICM in the dizzy

the car reves smothly but the techo kind of like a bit jumpy in the 6-8k rpm range !!

car is running hondata S100 with B18C2 on EG !!

TheSaint
15-08-2011, 02:53 PM
no they arent interchangeable with ek. people use the ek sideskirts, but u have to shorten and drill new holes to fit eg

thats not entirely true - depends on which skirts you are using
if its EK hatch to EG hatch than u need to shorten them and make a couple holes for the clips
if its EK hatch to EG sedan the length is perfect u just need to make a couple holes for the clips

either way only use EK hatch skirts - much easier to fit

x3cindymichael
13-09-2011, 01:23 PM
yes wiring for ITR cluster onto a eg is quite a pain from what i have heard.

Your best off just getting another eg cluster .. if your keeping the car for yourself and want it make it look pretty then get a lower km cluster. However when selling the car off it's best to tell the buyer you have changed the cluster so that they know the kms on the car (well i would). I ran ek side skirts on my eg, and yes they require some modification but i believe its well worth it.. looks much better (also heard dc2 skirts work well too). i have put rear suspension from a ek on a eg before you need to add washers and i had to grind back a little bit of my aftermarket blox lower control arm , but it fits well. so yeah some things are interchangeable but require some/slight modification. panels shouldn't be interchangeable. Strut braces (some cases they are). Hope this helps

goodluck