Uploaded my dyno graph already!!

[edw-R]

http://www.ozhonda.com/forum/vbgarage.php?do=view&id=2886

Hope to hear your opinions !!

[thanh]

:eek: can we swap cars plzz!

nice set up :thumbsup:

[andreqo]

nice!!!! how fast 1/4mile ?

[edw-R]

I will try 2 weeks later. Thanks

[andreqo]

with that kind of power i assume you should be able to run mid 13 ...good luck

[panda[cRx]]

v nice

[Sp3rMz]

:thumbsup: :thumbsup: :thumbsup: Only wish my car called pull those figures.

[CJL]

could* my ferry lil friend

Nice one brother

[bigjo5]

excuse me how do u read a dyno graph?

[LatinoHatchCrap]

http://www.ozhonda.com/forum/vbgarage.php?do=getimage&id=685
Toda B cam
Toda cam gear
Toda valve spring
Mugen headgasket
Port & polish head
70mm throttle body
Fuel regulator
Hotwire cable
NGK Ir spark plug
HKS twin power
AEM lighten pully kit
Cusco oil catch tank
Spoon Sports reservoir tank covers
Trust oil cooler kit
Mugen radiator cap
Koyo racing radiatior
HKS racing suction intake system
5 zigen header
Mugen cat-back exhaust
:thumbsup::thumbsup:

[LatinoHatchCrap]

Very nice numbers!!!

If you've got the A/F graph post it up!

[edw-R]

Thank you for your help!!

I don't know how to post pic in here. Just know how to put the pic in VBGarage.
I updated the A/F graph already. Can you teach me how to post pic to here??
Thanks alot!!:thumbsup:



Very nice numbers!!!

If you've got the A/F graph post it up!

[toE]

use the url of pic here .

Great figures! :thumbsup:

:)

[LatinoHatchCrap]

http://www.ozhonda.com/forum/vbgarage.php?do=getimage&id=705

http://www.ozhonda.com/forum/vbgarage.php?do=getimage&id=706

Looks good!! I reckon you could hit 145kw with a few more runs:thumbsup: :thumbsup: what c/r is it at?

[qup70c]

damm that's impressive for a dc2, keep it up :thumbsup: :thumbsup:

[edw-R]

What do you thing about the kw?? and do you think it can tune more power ? and how to tune it more power with changing A/F ratio??

[LatinoHatchCrap]

I think thats very good power for a stock AUDM block. It proves that with a B18c6 good numbers can be had with modified head and bolt-ons!!
Do you know what settings your cam gears are set at? looks like you tuned on a hot ass day :thumbsdown: Overall I would be stoked with that result considering the block is stock...now hit the strip and see how you go :thumbsup:

[ProECU]

I thought you mentioned the block was built???

In any event, good result all round, however did you try tuninng it leaner still?

[edw-R]

The block is standard. I haven't try it. Some guy ask me to try hondata. I dun know it is good or not. If i want to try, i need to pay $350 for tuning and installation. Is it worth to change from apexi power fc to hondata??

[94vtirozguy]

how can it be stock block when you have the following ?

Toda B cam
Toda cam gear
Toda valve spring
Mugen headgasket
Port & polish head

I think you mean stock bottom end.

p.s.: nice power output though

[GReY_CVC]

That dyno figure is at the wheels rite??... thats relly gewd mann...

[keztec]

nice machine

[tofu R]

The block is standard. I haven't try it. Some guy ask me to try hondata. I dun know it is good or not. If i want to try, i need to pay $350 for tuning and installation. Is it worth to change from apexi power fc to hondata??

I think that you will feel little difference if u change between hondata/powerfc.
they are "Slightly" different with their pros and cons..

But i think in this case.. tuning is more about who you get to do it not what your running .. especially in this case when the ecus arent that different.

Also looking forward to see what times you run.

:D

[edw-R]

Yes. I just got stock bottom and dyno figure is at the wheel.