Dc2r front & rear swaybars on crx del sol

[EG5VTI]

Just wanted to see if anyone knew.

Could I run front and rear dc2r sway bars on crx del sol? / has anyone done this?

Also for a new suspension setup would a dc2r rear lca be beneficial/ recommended as I want to get some shocks?

Sorry for the noobish q's. Just hard to find anything for crx del sols.

[dc292177917]

yes both sway bars are the same as EGs and DC2s...
i hv been thinking of putting the DC2R sway bars on mine
u need a rear subframe brace if going anything more than 19mm on the rears (DC2R's is 22/23mm not too sure)
the reason stopped me from doing so is the OEM 22/14 setup is already pretty tail happy
putting stronger RSB is going to give too much oversteer...which is very dangerous in a FWD...
try to get a set of nice coilovers first b4 u do the sway bars ;)

[EG5VTI]

Thanks heaps for the advice :)

[dougie_504]

Yeah I have a DC2R RSB that I haven't stuck on yet. I'm a little concerned about the potential of the ass flicking out since I don't have great tyres on ATM. Will upgrade my tyres first, then consider getting a SFB and install.

Does anybody with an EG or some sort have any feedback RE: DC2R RSB and it's tail-happiness?

[B18C VVTi]

bump for an opinion on this as well.
Currently got ITR F+R sway bars with subframe bracing ready to go into my eg with relaible tanabe coilovers...is it safe to assume it'll be as tail happy as a stock DC2R?
if it is I'm cool with that.

[dougie_504]

Probably not, chassis itself isn't as stiff. Sway bars will help, but they're in different leagues really...

Still, I'd like to know how it goes mate.

[vtecing]

I had 22mm rsb + asr on my eg5 with stock fsb. No where near as tail happy as my dc2r.

Del Sol / eg / dc2 all share the same chassis, and it is also very similar to first gen crv, some parts are interchangeable.

[dc292177917]

i wud say del sol drives more like a DC2...
pretty tail happy already even when stock...