PDA

View Full Version : Buying a DC2R and need advice...



DarkAgent
03-09-2011, 05:21 PM
Hey fellas,

Any help would be appreciated on this. I'm going to check out a DC2R tomorrow and just want to know what things I should be particularly looking out for.

When checking the VIN I'll use this as reference:

http://www.itrca.com/FAQ/general/vincode.php

Can someone tell me how the "check digit" works and where I can find the engine code.

I'll also look to make sure it has a 'PR3' head but not sure where to look for this marking.

Will also look for oil around the VTEC solenoids, not sure where to look though.

Its a 99 and looks quite clean. Any other tips/advice you can give would be greatly appreciated :D.

dougie_504
03-09-2011, 06:22 PM
Search, we often advise people on what to look for in a car. Same applies to everybody, pretty much no matter what car.

slingsy
03-09-2011, 06:28 PM
Hey dude, just he usual stuff covered in many threads on here just do some more searching in this section/ noob section and get googling. but I'll give a few since I got nothing better to do :p

-Look for B18C7 with the engine number on the block, assuming this is an audm teg? If jdm there will be no number 7. (bottom left of block)
-Look for typeR badge under the handbrake
-5 lug
-Look in the boot for a boot brace (on boot wall)
-Rear lower tie bar (small bar under rear of car bolted inbetween the lower camber arms)
-Check sussy (use all of your weight to push the front then rear down if it bounces then they're shot if if comes straight back up they're all good)
-Fluids to see if owner has been maintaining it

As for the vin/revs and encumberance check this site has got it covered for all states, only downside there is a fee for this website. you can do it free elsewhere but the price for this wasn't a deal breaker.
http://www.CarHistory.com.au

That'l do me since im on my phone but hope this helps :D good luck man.

nerrrus
06-09-2011, 10:58 PM
whats your budget?

DarkAgent
08-09-2011, 01:17 PM
I got it and I'm loving every minute!

steeeven
08-09-2011, 03:01 PM
Hey dude, just he usual stuff covered in many threads on here just do some more searching in this section/ noob section and get googling. but I'll give a few since I got nothing better to do :p

-Look for B18C7 with the engine number on the block, assuming this is an audm teg? If jdm there will be no number 7. (bottom left of block)
-Look for typeR badge under the handbrake
-5 lug
-Look in the boot for a boot brace (on boot wall)
-Rear lower tie bar (small bar under rear of car bolted inbetween the lower camber arms)
-Check sussy (use all of your weight to push the front then rear down if it bounces then they're shot if if comes straight back up they're all good)
-Fluids to see if owner has been maintaining it

As for the vin/revs and encumberance check this site has got it covered for all states, only downside there is a fee for this website. you can do it free elsewhere but the price for this wasn't a deal breaker.
http://www.CarHistory.com.au

That'l do me since im on my phone but hope this helps :D good luck man.

I was told that these are optional on the dc2r?

DTN
08-09-2011, 03:04 PM
nah its standard only the rear strut bar was optional

dougie_504
08-09-2011, 04:32 PM
I got it and I'm loving every minute!


CONGRATULATIONS MAN!

Taken any of your own pics of the new ride? Pumped for ya.


Where abouts do you live?