PDA

View Full Version : Problem with my ITR (part 2)



Sp3rMz
13-02-2005, 05:09 PM
As most of you know I have tappets problems but ontop of that I have realised I have another problem. When I rev my car theres another ticking tapping scratching ratting sound comming from the engine. To be specific from the cam gear side of the engine. Anyone any ideas? I also notice on the free way soon as i pass 3.5rpms there a rattling type of noise? Think my car is goin to blow up.

**shrugs**

joneblaze
13-02-2005, 06:24 PM
Is the funny ticking scratching sound coming from your distributor?

Where is the 3.5rpm+ noise coming from? Under the car? Could be loose pebbles/gravel in your cat undershield or something along similar lines, ie. somewhere in your exhaust...

bubblecivic
13-02-2005, 06:28 PM
Could be even a loose screw !!

panda[cRx]
13-02-2005, 06:31 PM
distributor? didnt he say cam side?

sesshoumaru
13-02-2005, 06:40 PM
does it sound like really fuked mechanical rattling? or just some vibrating hum?

olda
13-02-2005, 07:55 PM
Could be even a loose screw !!

Good chance this!!!!!!!!!!!!!!
Had a cylinder head off????????
One of the screws around the timing belt could be loose.
Take your timimg belt cover off and check it out.
Don't wait too long!!!!!!!!!!!!!!!
Could be a very expensive fix, if the t/b breaks!!!!!!!!!!!!!!! :!:

ECU-MAN
13-02-2005, 10:02 PM
']distributor? didnt he say cam side?

the dizzy bone connect to the camshaft bone :)

is it a metalic squeeky type of sound

tinkerbell
14-02-2005, 09:13 AM
please record the sound and post in this thread, you know how stupid trying to diagnose a bloody noise over the internet is...

wynode
14-02-2005, 09:44 PM
please record the sound and post in this thread, you know how stupid trying to diagnose a bloody noise over the internet is...
*Word*

EuroAccord13
14-02-2005, 10:43 PM
Try spraying some dry lube over the belts and see if the ticking continues....

pornstar
14-02-2005, 11:21 PM
sif werd wyn, thats my word

EG_2_TEG
15-02-2005, 02:30 AM
i have some sort of noise at exactly 3500rpm, its more of a wobble noise
but yeh, should record it and put it online :S