PDA

View Full Version : Need Help Fixing Antenna Motor On Honda Intergra 1994


thafrost
09-09-2011, 11:23 PM
Can anyone help or show how to install the motor antenna properly? and the proper positioning of the gears inside the motor, i,ve replaced the the mast of the antenna but it brings the antenna down and up fine but with each time the gears keep churning after its all the way down or all the way up and makes the clugging, or ripping of the antenna cord anyone got a solution? or ideas..i personally think its the gears, are placed wrong cuz i opened it up the first time without paying attention to how the gears are placed etc..please help :)
Bulbasaur
09-09-2011, 11:37 PM
i dont think the churning and and gurging noise is a problem its just ensure its at maximum/minimum length if it is making the noise for both up and down i dont think changing the gears positioning will do it any help. and it most likely will not snap the cord for the gears any time soon. ive got an accord antenna on my integrafor a year and it always makes the noise going up or down and it has not broken yet
Indie
14-09-2011, 08:47 PM
Shark Attack II antenna replacement.
cph3r
14-09-2011, 09:57 PM
Shark Attack II antenna replacement.

Agreed, the stock antenna is worth replacing even if it works.
dc2screama
16-09-2011, 02:10 PM
Where can you get a shark antenna from boys?
Riceboy
16-09-2011, 04:37 PM
the clunking does no harm. if you want to get rid of it you need to crc the antenna. pull it all the way out manually first to crc then switch stereo off to watch it go all the way down. If it does retract all the way you will be able to see where its getting stuck. then you need to clean and crc it some more.

But if you antenna is kinked in the first place then your facked.
cph3r
16-09-2011, 05:28 PM
http://www.locustom.com/shark2_kit.htm

Shark Attack II Antenna ^^ =]
dc2screama
16-09-2011, 07:17 PM
Thanks cph3r, is it easy to install or a DIY?
dc2screama
16-09-2011, 07:23 PM
All good, found one
cph3r
17-09-2011, 04:14 PM
Easiest thing I've done to the teg for sure, you'll have no problems.
NightKids
19-09-2011, 02:35 PM
Just get the Shark antenna... looks heaps better too...
thafrost
19-09-2011, 04:08 PM
yeah i just brought a new OEM mast lol so an shark attack 2 antenna is out..lol well i could but i just spend soem money on another one? so is there a way or does anyone have a diagram of how the motorized gears are placed inside the motor, because i knoe i effed it up buy opening the motor lol to remove the antenna in the first place lol but maybe just trial and error lol but if u guys know anything to help minimuse or ger rid of the clugging noise it would be helpful