View Full Version : Sensor on intake arm ??
I need to find out what the sensor next the breather hose on the Intake arm is as I want to get a simota whale penis and not sure where to put it?? On an ek4
mocchi
12-09-2011, 07:38 PM
IAT? Intake Air Temperature
I had a feeling that might've been it. If I was to put a short ram intake, how do I go about it ? short rams only come with one nozzle for a breather hose
If it only comes with one hole just drill another hole and mount the IAT with a grommet.
EG52NV
12-09-2011, 10:01 PM
or route breather hose to atmosphere and shove IAT in the hole
Will suss out when intake comes then. Thanks for the input so far.
or route breather hose to atmosphere and shove IAT in the hole
Isnt it illigal to have it venting to the atmosphere?
EG52NV
13-09-2011, 11:16 PM
Isnt it illigal to have it venting to the atmosphere?
It probably is but if you dangled the breather hose towards back of engine who would know, some intakes come wit a mini filter you chuck onto breather pipe rather the routing it back into intake
Bulbasaur
13-09-2011, 11:28 PM
what do breathers do? arnt they useless on non turbo?
It probably is but if you dangled the breather hose towards back of engine who would know, some intakes come wit a mini filter you chuck onto breather pipe rather the routing it back into intake
Lol tru id rather connect it but each to their own :)
what do breathers do? arnt they useless on non turbo?
IIRC the breather hose from the valve cover sucks the waste gases from your vavle cover back through your intake to reduce emissions.
marquee
13-09-2011, 11:40 PM
If you drill a hole get a rubber grommet smaller then your iat so it can fit nice and snug you can get them from bunnings for like 10c
ToFuBoi
13-09-2011, 11:44 PM
Isnt it illigal to have it venting to the atmosphere?
more importantly isit safe for the engine? waiting on a penis but im pretty sure they have a separate hole to plug that thingy in to
*edit* guess the breather will make it safe..
I dont think the breather hose needs a vacuum or it would be on the IM not the intake, I would think venting to atmosphere would only be bad for the enviorment not the engine but someone correct me if im wrong.
tsol0811
13-09-2011, 11:53 PM
On the simota whale penis there are already 2 holes. One for the vaccum and one for the sensor. It is direct plug and play so no need to worry.
When you get the whale penis there should be a plug on the sensor bit. Just pull it out and plug in the sensor which should fit snugly into the hole!.
good luck!
Sweet, thanks all for the replies.
EG52NV
14-09-2011, 08:09 AM
waiting on a penis....
Hahaha!!!
ToFuBoi
14-09-2011, 07:24 PM
;) hehe
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.