View Full Version : Help! DC5R Check Engine Light codes!
DC5.Raven
15-09-2011, 11:10 AM
I turned the ignition on my DC5R and I got the check engine light yesterday morning.
Got an OBD2 code reader today and the following codes came up:
41-01 HO2S (B2 S1) Heater Failure
41-04 HO2S S1 Heater Failure
I think it has to do with one of the O2 sensors, just not sure which one.
Can anyone help?
Thanks!
TypeS
15-09-2011, 02:58 PM
What I found in my holy bible;
HO2S= Heated Oxygen Sensor, sensor used to measure the amount of oxygen in the exhaust, which is used to adjust the air/fuel mixture in the engine.
B2= Bank 2, this is a location identifier, the engine has 2 banks, 1 and 2. Bank 1 refers to the bank nearest cylinder #1.
S1= Sensor 1, all engines have an oxygen sensor before and after the catalytic converter, S1 refers to the sensor before the CAT, S2 is after the Cat. Conv.
Translation:
Your primary 02 sensor's heating element has failed. You will have to replace the complete sensor.
DC5.Raven
15-09-2011, 05:02 PM
Very helpful info.
Thanks heaps!
BLV-27J
15-09-2011, 05:23 PM
where did you get the reader from?
DC5.Raven
15-09-2011, 05:45 PM
Went to a mechanic to borrow. You can get cheap ones from eBay for $80
r3ckless
16-09-2011, 06:31 AM
Denso o2 sensor?
munkaii
17-09-2011, 11:41 AM
OEM sensor is denso for S1
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.