Newbieee

[prada21]

Hey all.

My name is Justin and i just purchased a 92' honda civic last night

Love the car. i have come from a 2001 Nissan pulsar.

I do have a few issues that i would really love some help in. i have made a post.

I need to know what the pipe that is used between the carbi and the motor.

Thanks for everything

Justin

[Fredoops]

Welcome ot Oz honda, some photos might help,

[prada21]

i know im sorry. but im at work and cant seem to upload pics :(
i have a pic on my facebook tho =/

[prada21]

this is the car i brought.

http://sydney.gumtree.com.au/c-ViewAdLargeImage?AdId=306726154

Pic number 5 shows the 4 pipes i need.. thanks

[ACTI0NMAN-1]

Are you trying to say you need an intake manifold to replace the ITB's?

[redefine]

get the pic on facebook, right click, and select either "open image in new tab" or "view image", then get the url and put it in a post :)

[prada21]

http://www.facebook.com/photo.php?fbid=10150374419160021&set=a.153907865020.149664.606135020&type=1&ref=nf

the you go.. and i just been told it was my intake not carbi.. i thought they were my carbi... im sorry im not to good with engines.. i really wanna learn

thanks guys

[prada21]

so what i need is to know what pipes i need to put in the blue section between the intake and motor.. ones that done sqeeze and suffercate when i drive.. thanks so much!!!!

[redefine]

the link didnt work, try it again, and look for ".jpg" or ".jpeg" at the end of the url, if it dosent have that then it didnt work.

[prada21]

http://www.facebook.com/photo.php?fbid=10150374419160021&set=a.153907865020.149664.606135020&type=1&ref=nf

[prada21]

cant load it up here at work. sorry guys im blocked with limited access..

[Fredoops]

so what i need is to know what pipes i need to put in the blue section between the intake and motor.. ones that done sqeeze and suffercate when i drive.. thanks so much!!!!
Between the red metal box thing and the engine?
http://sydney.gumtree.com.au/c-ViewAdLargeImage?AdId=306726154&back=-1&ImageIndex=1

Thats an intake manifold... It has to be metal, else it'll melt.

Also... You sure it's that part that makes the noise? Not the intake itself?

[prada21]

Thanks for the help guys

I just finished my EFI conversion :) went well.. just 1 night left to wire up the tail lights and get a blue slip... this car has been a nightmare and has cost me alot.. :(