D16Y4 Intake minifold

[prada21]

Hey guys

I need to find out what pipes i need to go from the intake manifold to the engine?
I brought the car 2 nights ago and there was rubber ones on there.

I need to replace these as the car will not start. does anyone have any idea what the pipes are i need?
Im in Sydney.

Thanks alot

Jus

[prada21]

the engine is a D16y4

[beeza]

The big hose on the back goes to the firewall where the brake master cylinder is.

The small hose next to it can be blocked off with a screw.

The hose on the front goes down that square hole and into the PCV system.On the end of the hose there is a 'Purge valve',a one way valve,just clean that up good and fit the hose back on.

[markismaximus]

Hey guys

I need to find out what pipes i need to go from the intake manifold to the engine?
I brought the car 2 nights ago and there was rubber ones on there.

I need to replace these as the car will not start. does anyone have any idea what the pipes are i need?
Im in Sydney.

Thanks alot

Jus

did the car start when you bought it?

its unlikely the car wouldn't start just because of missing vac lines. If anything the idle would just be shit.

What makes you think this is causing starting issues? Sounds like something else to me

[prada21]

Hey guys.. i think ive been able to get a pic.. http://tinypic.com/view.php?pic=2u9tppc&s=7

[prada21]

http://tinypic.com/view.php?pic=28162yd&s=7

this is also my engine bay.. now i dont know much about engines but what i do believe is that the car was once carbi and now i think its a fuel injected..

Now between the engine and what ive been told is the carbi or air intake is a rubber hose and blue.. i need to know what i need to put in there because when the car starts the pipes suck in.. does anyone know if i need just a high grade rubber pipe or metal..

Sorry if i seem stupid, but i really am not sure.
Thanks guys

[prada21]

http://m1090.photobucket.com/albumview/albums/blueprada21/Mobile%20Uploads/engine2.jpg.html?sharestatus=true?pbauth=1_uLEBonV PfaLdh1h3YMYz2ZMekUQj1lKzMyOsxe8Io0jsvlKGOOcFNCaRr S904SLAjjsXROeTAOQbp1gL2N0SVJjDyI019Bcul7bR7Ea6K4u LbGwHEQM0P%2F%2FVsZzff%2FAtJndd%2BVVVIMly%2BwXC8U% 2BvmQFEMmnOIz1FqxS%2FzUWYsHI%3D

[prada21]

http://s1090.photobucket.com/albums/i369/blueprada21/Mobile%20Uploads/?action=view&current=engine2.jpg&evt=user_media_share

[beeza]

Pic no workie..

Have to resize the pic 1st then upload on photobucket,then copy direct link and paste it in the world link above :)

[prada21]

http://s1090.photobucket.com/albums/i369/blueprada21/Mobile%20Uploads/?action=view&current=engine2.jpg&evt=user_media_share

attempt 99999 lol
if this one fails i give up.. =(

[beeza]

Is that ITB's?

I cant see the pic so good as I have reflection on my screen and the pic is smallish..

Looks like an aftermarket IM if it isnt itb's?

Anychance of resizing the pic 3 times bigger?

[prada21]

sent..thanks man

[beeza]

No probs mate,PM'ed ya!

[prada21]

http://tapatalk.com/mu/789264e6-3fd2-5513.jpghttp://tapatalk.com/mu/789264e6-3fe3-c46f.jpghttp://tapatalk.com/mu/789264e6-3ff5-d042.jpg

[beeza]

Looks good,with tuning they would work nice,I reckon!

I just got a skunk2 IM for my y4,looks like a great upgrade over stock!

Cant wait to install it!

[prada21]

It will take weeks to tune them.. plus a fair amount of cash.. id rather spend the cash putting it back to stock =|

[beeza]

Forsure.

[prada21]

I'm going to attempt to replace the carby fuel pump tonight so I can get the car running.. then once defected.. get it all back to stock =]
Do you know how to take the back seat off? And how to change the fuel pump? Thanks mate

[beeza]

The back seat is just 3 12mm bolts on the bottom and about 2 for the rear pice,if U just search around you'll find them,it's easy.

Disconnect battery.

Under the seat is the fuel pump cover,remove it,unplug the sensor plug.

Take the next lot of screws/bolts out and pull the whole unit out.Then replace the pump as per U take it off then place back in,the same way U pulled it out.

This was the only tricky part for me,but I mighta been trippin' lol was putting it back in,I couldn't get the angle right...finially did but.

That's it. :)

EDIT: If that's the same as mine..haha

[prada21]

Well I got the back seat out.. but little did I no.. my fuel pump is under the car.. argh.. lol
But thanks mate. You have been heaps helpfull