View Full Version : Dc2 and eg5 a/c
myztery
27-09-2011, 07:54 PM
As stated, can I run a full length dc2 radiator and aircon setup in a eg hatch with a b18c7,
If so what's needed???
I have the full length radiator and hoses off a dc2, but no to sure what else I need????
GSi_PSi
27-09-2011, 08:02 PM
need to remount radiator and condensor brackets from the bottom, drill spot welds and remount n weld and provided you have full dc2 setup you should be fine
aznstyler
28-09-2011, 09:06 PM
Just use the EG one.
myztery
29-09-2011, 05:52 AM
Just use the EG one.
Iv always liked the look of full length but I also want to keep abit of comfort as summer is coming up
impossi13le
29-09-2011, 10:11 AM
im using an eg radiator on my swap, but it's a twin core, does the job perfectly - no overheating issues
the only thing with using an eg condenser is you have to either source out an ek4 condenser to compressor pipe, or mod your old one :/
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.