PDA

View Full Version : 91 eg B18c2 with a b16a gearbox issue!!



suppablo
28-09-2011, 01:59 PM
Hey ive had my car for almost a month and the changing gears from 2-3 crunch. Also just last night i was on the m4 when gear 5 popped out 3 times and i had to hold it in. i could even feel the knob trying to pop out again. i was wondering what could be the issue and if i should rebuild the gearbox and ways to strengthen the gears?

Vvvtec
03-10-2011, 04:02 PM
Your synchro's are cactus by the sounds of it.

You have two options.

You can get yourself some of THIS (http://www.demon-tweeks.co.uk/Performance/Oils_Additives/Gear_Oil/Red_Line_MT90_Gear_Oil/516/0/36316). This Redeline MTL has a reputation of eliminating 'crunches' in between gearshifts. From what i've read, it's some good stuff. However, this is only a temporary solution. It will not fix your synchros, it will only cover up the problem.

Alternatively

You will have to remove the gearbox from your car and have the 2nd-3rd synchros replaced and by the sounds of it, 4th-5th aswell. This is a costly excercise, but atleast you will have actually fixed the problem, and you'll have piece of mind that you've got brand new parts in your 'box. You can get ktis like this here (http://shop.synchrotech-transmissions.com/BSK-SYN101B-Type-R-GSR-B16-Bearing-Seal-and-Synchro-KIt-BSK-SYN101B.htm;jsessionid=2EC7C6C052B447060B9FDFD032F C0834.qscstrfrnt01). You may aswell replace them all while you have the gearbox out.

:)

Vvvtec
18-10-2011, 11:08 AM
Any update with this?