PDA

View Full Version : Inner tie rod replacement for EK



tangyoonee
06-10-2011, 01:07 PM
Hi

I think I need to replace inner tie rod as I here some knocking when I jack up the car and shake my right wheel.
Can anyone replace my inner tie rod right for my 97 EK?
thanks

vtecing
06-10-2011, 01:20 PM
yes, people can replace your tie rod

grifty
06-10-2011, 01:30 PM
knocking can be from anything ranging from the wheel bearing, upper/lower ball joint, rack end or tie rod. Get someone to move the tyre left & right and also up & down by hand while you look and feel for the excess movement.

tangyoonee
06-10-2011, 01:37 PM
I'm quite sure it's driver side inner tie rod. when the car is jacked up I tried to move my wheel left to right and there's some play on the driver side. Also there's knocking when steering wheel turned left to right on stop. I've replaced my outer tie rod as I thought it was causing it. I don't have the tool to change inner tie rod so I was wondering if anyone advise where I can get this done?

vtecing
06-10-2011, 02:11 PM
any mechanical workshop

tangyoonee
06-10-2011, 02:15 PM
any mechanical workshop

Y wud I ask here? I don't wanna pay ridiculously to any mechanic who can't do a gd job.

tiksie
06-10-2011, 03:41 PM
"Where can I get this done ?"

"Any mechanical work shop"

What kind of answer did you want ?

vtecing
07-10-2011, 09:21 AM
I think he wants the brothers to come to his crib so they can do the work for him and pay them with street cred and respect


they are probably much more qualified too

tangyoonee
18-10-2011, 07:20 AM
Just bought steering rack. Is it easier to replace the whole rack or inner tie rod only? Coz I only need to replace driver side inner tie rod.

For those who has no experiences or don't know the answer don't post here unless you have nothing to do.

tiksie
18-10-2011, 09:44 AM
Replacing the tie rod would be easier than removing the whole steering rack.

tangyoonee
18-10-2011, 10:07 AM
Ok. thanks

Symphorced
21-10-2011, 06:40 AM
I just had mine replaced. Any half-decent workshop should be able to do it in less than an hour.