Eg exhaust on DC2r

[l9emup]

Hi,

Just enquring whether a fujitsubo rm01a on a eg will fit on a integra dc2r?..

Ricardo.

[mocchi]

dc2 cat back(top) is shorter than eg(bottom).

http://i516.photobucket.com/albums/u323/breadbaconncheese/B%20Swap/P1020464.jpg
http://i516.photobucket.com/albums/u323/breadbaconncheese/B%20Swap/P1020465.jpg

i think muffler is longer.

[jdm18c]

wont fit will need mods to make it longer

dc2 exhaust is longer than the eg one

[mocchi]

funny, that top catback is from a dc2r.
bottom stock one is stock eg hatch.

but searching on google, ppl say dc2 catback is longer than eg.

[l9emup]

What mods will be needed to make it fit?

[mocchi]

What mods will be needed to make it fit?

your left testicle.

[jdm18c]

just sell the eg on and buy a dc2 one simple

[Bludger]

your left testicle.
I was told right

[dc2r-0636]

What mods will be needed to make it fit?

get a straight pipe with flanges made to sit BETWEEN the b pipe and cat

dont let the exhaust shop cut up ur exhaust and weld the straight pipe onto it.

but imo the negatives out weigh positives. as in too much work needs to be done and money wise its not worth it.

jst find a dc2r exhaust

edit* just get ur cat extended so its longer like the 2nd pic moochi posted

[l9emup]

get a straight pipe with flanges made to sit BETWEEN the b pipe and cat

dont let the exhaust shop cut up ur exhaust and weld the straight pipe onto it.

but imo the negatives out weigh positives. as in too much work needs to be done and money wise its not worth it.

jst find a dc2r exhaust

edit* just get ur cat extended so its longer like the 2nd pic moochi posted

Thankyou for your feedback.

[l9emup]

dc2 cat back(top) is shorter than eg(bottom).

http://i516.photobucket.com/albums/u323/breadbaconncheese/B%20Swap/P1020464.jpg
http://i516.photobucket.com/albums/u323/breadbaconncheese/B%20Swap/P1020465.jpg

i think muffler is longer.

Thanks man for the pic.

[slingsy]

Eg hangers are longer and placed further back on the axel back, also hangers may be unequal length. B pipe hangers aren't placed spot on so it sits low these will need attending to for perfect fitment. Need to extend bpipe to axel back, best to get a flanged pipe and bolt imbetween, it will be a hassle. Get the aftermarket header and cat, bolt it up (it will probably be shorter at bpipe depending on the cat).. for the cleanest fit I will be extending my cat (1 piece) then at the axelback (pipe with flanges) bolt flanges up to b pipe/axelback (need to buy 2.5" I.D 2 bolt flanges/gaskets ) measure cut pipe to suit then tack in position. Its only around 100mm short from the rear bar. A big piss around if you ask me, I wouldn't do it if the exhaust I wanted was readily available new/second hand for my type of car.