PDA

View Full Version : [CU2] Front number plate holder and Slim number plates


I CU2
08-10-2011, 02:25 AM
Hey guys,

I've seen some of your CU2's without the number plate holder at the front, was just wondering how did you manage to remove it?

It's bigger than the slim number plates and over hangs at the bottom.

Here's what I'm talking about:

http://www.themotorreport.com.au/content/image/2/0/2010_honda_accord_euro_luxury_road_test_review_aus tralia_09-4c7f11779289d-mc:1266x639.jpg

http://www.themotorreport.com.au/content/image/2/0/2010_honda_accord_euro_luxury_road_test_review_aus tralia_05-4c7f0d658d3a4-m:930x584.jpg
marquee
08-10-2011, 10:18 AM
I'm pretty sure it's just remove the number plates and u will see two square s that u can pop out with a flat head then behind that there will be two screws that's how it is on the cl9 should be the same
MR_LATE
08-10-2011, 11:52 AM
Yep. That's it. Or u can use and air saw if u want to keep the plastic but have it flush
euRo_noob
08-10-2011, 01:25 PM
Yep. That's it. Or u can use and air saw if u want to keep the plastic but have it flush

What MR_LATE said. A few people sawed theirs off or they just took out the black frame at the back. It's just simple bolts, not that hard.
MR_LATE
08-10-2011, 02:48 PM
air saw is 100-130$. so if u got a friend who has one. borrow it. since i had to buy mine, ive only ever used it twice.
marquee
08-10-2011, 04:38 PM
air saw is 100-130$. so if u got a friend who has one. borrow it. since i had to buy mine, ive only ever used it twice.

Looks like he has a friend who has one :p
ope126
20-03-2012, 04:36 PM
I used to have a CL9 and you could remove the black plastic holder and then get a larger / narrower one to suit "EURO" style number plates.
I spoke with Honda parts and it appears that this "EURO" plate holder is not available for the CU2.

Can anyone share there expeiences or how they now attached Euro Number Plates...

Might contact Honda UK, they will have em'.
ope126
07-04-2012, 06:14 PM
I ended up ordering from www.lakinplates.com.au
I got the front and rear kit to suite "Euro" sized plates.
They work a treat!!!
pitiek
07-04-2012, 07:00 PM
What do these brackets do?
supersaiyan
30-11-2012, 12:24 PM
i took off these brackets, and i can't seem to put it back on? how do i install it lol so noob?

on the black rubber thing, does the circle bit hit the paint of the car or the flat circle side?

can't seem to screw it back on?