Turn my 92 si sedan into a jdm SiR II sedan?

[heist]

just wanna list of the things i would need to make this possible, ie engine, interior ect...

[joyride]

would that be a civic ferio?

[heist]

huh?

[**Ghost**]

ditto... cos i dont think SIRII came out in sedan form... SiR= EF9... SiR2 = EG6 and they both are hatches...

The model u looking to change ur sedan to should be a ferio, which came with B16A and bucket seats front and back

[civ_sik]

well in nz (where i was from) the ferio has a 1.5L sohc, and there are plenty or sir sedans around. Some there are definately SIR sedans around.

[civ_sik]

b16A engine same as hatch... its pretty much the same as the hatch... 15inch alloy wheels, front lip, rear spoiler ill see if i can find some pics for you seen as im bored...

[heist]

thanks bro, but i was under the impression that the SiR I was the hatch but the SiR II was a sedan....i read that somewhere..

[civ_sik]

i think that the sir sedan is just an sir not sir2

[heist]

96'-2000
Ek4 = Gen 6 Civic Hatch/sedan(ferio) Vti-R/SiR II EK (b16a2+hydro clutch)
EK9 = Gen 6 JDM Civic Hatch Type R (b16b+hydro clutch)
EM1 = Gen 6 Civic Coupe VTi-R (b16a2+hydro clutch)


92'-95
EG6 = Gen 5 JDM EG civic Hatch SiR II (b16a2+hydro clutch) - Not Vti-R
EG9 = Gen 5 JDM EG Civic SiR II Sedan / ferio (b16a2+hydro clutch)

'89-'92
EF8 = Gen 2 JDM CRX SiR (b16a+cable clutch)
EF9 = Gen 4 JDM Civic Hatch SiR (b16a+cable clutch)


Feel free to point out any mistakes I've made..


Read this site for more info

http://b16a.honda-perf.org/history.html

[joyride]

so everyone is correct!

back on topic, if you want your sedan to look jdm, it'd be hard to find the rear seat/bucket seat if you going through a wrecker/importer....

[heist]

well i mainly want it to be performance wise like the jdm one, but hopefully ill be able to source most parts.....i dont like the amber indicators tho...yuk

[tRipitaka]

so everyone is correct!

back on topic, if you want your sedan to look jdm, it'd be hard to find the rear seat/bucket seat if you going through a wrecker/importer....

Just bought myself JDM seats, front and back for $300 ..
AND got myself a SIR center console too for $30 ..
time to install them and make my sedan a four-seater, JDM wannabe :D

[heist]

where from trip? and are they the bucket rear seats?

[tRipitaka]

just wanna list of the things i would need to make this possible, ie engine, interior ect...

If you want the interior to look JDM, you'll have to replace the whole dash and door trims, as the interior is a darker, more charcoal grey + new seats.. the CC unit is different, center console, cluster, AMBER clock, steering wheel, plastic things that are on the rear doors, badges .. quite a few things u'll need to make it look jdm ..

Finding these parts wasn`t so hard for me, as the first wrecker I went to, had just imported a few EGs from Japan.. Mostly SIR hbs and sedans..

[tRipitaka]

where from trip? and are they the bucket rear seats?

In Melbourne.. I haven't installed them yet, but they`re the ones with the plastic mould in the middle.. it's still at the wrecker, gonna be put in this Saturday.. I pretty much stripped this whole JDM sedan, and gonna put it in mine this weekend..

[SIKCVC]

If you want the interior to look JDM, you'll have to replace the whole dash and door trims, as the interior is a darker, more charcoal grey + new seats.. the CC unit is different, center console, cluster, AMBER clock, steering wheel, plastic things that are on the rear doors, badges .. quite a few things u'll need to make it look jdm ..



the JDM models have the same as the ausy coloured dash, a darker grey and a black... the center console;'s are the same bar the up speced model which had a graphic equaliser and CD poket, some still had the cup holders.

[tRipitaka]

The JDM center console pretty much gives you two extra DIN slots, and fills the hole between the stick and the cigar lighter ..
The dash seemed darker to me, i'll have another look this weekend, but i know that the trims were a darker colour than my AUDM trims, which made me assume that the dash is the same colour, since it should be matching ..

[heist]

well im kinda just wanting the front and back bucket seats for now.....

[tRipitaka]

Just ask around at wreckers specialising in Hondas.. If they don't have the stuff you want, ask them to contact you when they get them in.. Although it may not be reliable, but it's still better than not getting them at all..

[joyride]

nice.
in regards to getting a jdm b16a front cut, my friend called up sss automotive, just jap and ichiban this morning and theyre all out of stock.
could be up to 3 months for the next shipment to come in...

[tRipitaka]

I know a place that has a couple of jdm b16a2`s left .. but it`s in Melbourne, and are auto ..
good ol` auto b16a`s ..
pretty alright pricing i might add .. :)

[civiceg9]

Just bought myself JDM seats, front and back for $300 ..
AND got myself a SIR center console too for $30 ..
time to install them and make my sedan a four-seater, JDM wannabe :D

where u find the seats and console?

[Setanta]

ditto... cos i dont think SIRII came out in sedan form... SiR= EF9... SiR2 = EG6 and they both are hatches...

EF9, EF8, EG6 and EK4 all came out in 2 specs: SIR and SIR II.

Go check Honda's website if you don't believe me. The "II" doesn't designate the model - merely the trim option.