b18c2 cams

[jayeg]

i snaped my timing belt took the head off and the mech said that there where no bent vavles i have put the head back on tighten the head bolts to 63psi but with the cams do they go in a spefic way if so there any diagams i couldnt find nothing on the net

[mocchi]

if you search on google you would find plenty. im sure you can count more than potato.

align the cam gears so the two dots line up, both cam gears have UP mark pointing upwards.
to hold the camshaft in place, you slide in a piece of metal rod in a hole on the camshaft body. this metal rod would hold cams steady on the head.

if you dont have this rod, camshaft would move because of pressure from valve springs pressing against cam lobes.
on k series, the hole is at the back of camshaft (pulse plate side).

sorry i cant remember precisely what diameter rod you need to use.