Log in

View Full Version : b18c2 problems


jayeg
28-10-2011, 04:09 PM
i have recent have had my timing belt done and put a new knok sensor in sine then my car is a slug till 5500 and it is now over heating both cams are engaging the car is idling good but it takes 10 seconds to get to 30km any ideas plz need help asap its not throwing the engine light it was till i change the sensor now its off
mocchi
28-10-2011, 04:28 PM
hey jayeg, how old are you?
srs.

your post is incoherent. you should rephrase it if you want ppl to actually spend their time and try to help you.
Bludger
28-10-2011, 04:39 PM
hey jayeg, how old are you?
srs.

your post is incoherent. you should rephrase it if you want ppl to actually spend their time and try to help you.
as opposed to turning the thread into a troll thread?
jayeg
28-10-2011, 05:11 PM
its not a troll thread im 25 my mate write the post he had oil all over his hands we have been working on the car and i forgot that we just put
on a injen cai and it sounds like its sucking to much air
Super-DA9
28-10-2011, 08:17 PM
maybe the mechanics put the belt on with wrong engine timing.

set the engine to top dead center and check to see if all the markings line up.
jayeg
28-10-2011, 11:22 PM
thanks i didnt no the timing being out could affect the car that much
Super-DA9
29-10-2011, 10:00 AM
yeah man, if one of the cam gears is just one tooth out of alignment it could quite easily cause this kind of issue.
tiksie
29-10-2011, 08:29 PM
If your car isn't throwing any CEL's, your timing is definitely out.
jayeg
29-10-2011, 09:44 PM
thanks i will talk to the work shop should i ask them to fix there stuff up or pay again
jayeg
30-10-2011, 10:36 PM
we have had the dizzy off recently when the timing belt went could it be possible the shop put the timing belt right and the dizzy is just out
Bludger
31-10-2011, 12:23 AM
no one here has more idea of what has happened to your car than you.

so to answer your question.

maybe, maybe not.
mocchi
31-10-2011, 07:13 AM
we have had the dizzy off recently when the timing belt went could it be possible the shop put the timing belt right and the dizzy is just out

didn't da9 advised you to check markings on cam gear? if you did, you wouldn't be asking that question.
tiksie
31-10-2011, 07:35 AM
Even if belt is on correctly and the dizzy is out, the timing is still out..

headasplode.jpeg
jayeg
31-10-2011, 01:12 PM
it was the dizzy all fixed thanks